RS PRO Hybrid Stepper Motor 2.8V, 0.44Nm Torque, 0.9 °, 42.3 x 42.3 mm Frame, 5 mm Shaft
- N° de stock RS:
- 535-0401
- Fabricant:
- RS PRO
Sous-total (1 unité)*
70,69 €
(TVA exclue)
85,53 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 7 unité(s) prête(s) à être expédiée(s)
- Plus 97 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 70,69 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 535-0401
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Product Type | Stepper Motor | |
| Sub Type | Hybrid | |
| Step Angle | 0.9° | |
| Holding Torque | 0.44Nm | |
| Voltage | 2.8V | |
| Frame Size | 42.3 x 42.3 mm | |
| Shaft Diameter | 5mm | |
| Current Rating | 1.68A | |
| Winding Arrangement | Bipolar | |
| Shaft Length | 24mm | |
| Width | 42.3mm | |
| Standards/Approvals | RoHS Compliant | |
| Resistance Per Phase | 1.65Ω | |
| Depth | 47mm | |
| Detent Torque | 25mNm | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Product Type Stepper Motor | ||
Sub Type Hybrid | ||
Step Angle 0.9° | ||
Holding Torque 0.44Nm | ||
Voltage 2.8V | ||
Frame Size 42.3 x 42.3 mm | ||
Shaft Diameter 5mm | ||
Current Rating 1.68A | ||
Winding Arrangement Bipolar | ||
Shaft Length 24mm | ||
Width 42.3mm | ||
Standards/Approvals RoHS Compliant | ||
Resistance Per Phase 1.65Ω | ||
Depth 47mm | ||
Detent Torque 25mNm | ||
RS PRO 4 Wire Bipolar Hybrid Stepper Motor 0.9°, 0.44 Nm, 2.8 V, 1.68 A, 4 Wires
A hybrid stepper motor with a 4 wire bipolar winding enabling precision and controlled movements with electric devices. Stepper motors are brushless assemblies that divide a full motor rotation into several smaller, equal steps, for greater precision and higher efficiency at lower speeds. A hybrid stepper model combines both permanent magnet and variable reluctance motor technology to maximize power in small devices.
These motors are commonly found in the field of lasers and optics, where they form part of complex devices such as linear actuators, rotation stages and goniometers. They have a range of commercial uses too, and you'll find them in everything from camera lenses and DVD players to 3D printers.
Features and Benefits
• Step angle of 0.9°
• Holding torque of 0.44 Nm
• Four-wire bipolar winding
• Voltage rating of 2.8 Vdc
• Frame size of 42.3 x 42.3 mm
• Hybrid stepper motor type
• Shaft diameter of 5 mm
• Current rating of 1.68 A
• Shaft length of 24 mm
• Depth of 47 mm
• Resistance per phase of 1.65 Ω
• RoHS (Restriction of Hazardous Substances) compliant product
RS PRO
RS PRO is the own brand of RS. The RS PRO Seal of Approval is your assurance of professional quality, a guarantee that every part is rigorously tested, inspected, and audited against demanding standards. Making RS PRO the Smart Choice for our customers.
Liens connexes
- RS PRO Stepper Motor 2.8V 1.8 ° 5 mm Shaft
- RS PRO Stepper Motor 2.8V 0.9 ° 5 mm Shaft
- RS PRO Stepper Motor 2.8V 1.8 ° 5 mm Shaft
- RS PRO Stepper Motor 2.8V 1.8 ° 5 mm Shaft
- Trinamic PD42 Series Stepper Motor Unit Stepper Motor 30V 1.8 ° 5 mm Shaft
- RS PRO Hybrid Stepper Motor 9.6V 1.8 ° 5 mm Shaft
- RS PRO Hybrid Stepper Motor 12V 1.8 ° 5 mm Shaft
- RS PRO Hybrid Stepper Motor 12V 42.3 x 42.3 mm Frame, 5 mm Shaft