Trinamic 1160 Series Stepper Motor Stepper Motor 48V, 1.01Nm Torque, 1.8 °, 60 x 60 mm Frame, 6.35 mm Shaft
- N° de stock RS:
- 284-4803
- Numéro d'article Distrelec:
- 154-22-027
- Référence fabricant:
- PD57-2-1160-TMCL
- Fabricant:
- Trinamic
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 284-4803
- Numéro d'article Distrelec:
- 154-22-027
- Référence fabricant:
- PD57-2-1160-TMCL
- Fabricant:
- Trinamic
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Trinamic | |
| Series | 1160 | |
| Sub Type | Stepper Motor | |
| Product Type | Stepper Motor | |
| Voltage | 48 V | |
| Holding Torque | 1.01 Nm | |
| Step Angle | 1.8 ° | |
| Frame Size | 60 x 60 mm | |
| Shaft Diameter | 6.35 mm | |
| Current Rating | 2.8 A | |
| Depth | 60 mm | |
| Distrelec Product Id | 15422027 | |
| Length | 75 mm | |
| Resistance Per Phase | 0.83 Ω | |
| Shaft Length | 24 mm | |
| Standards/Approvals | REACH, RoHS | |
| Width | 60 mm | |
| Winding Arrangement | Bipolar | |
| Sélectionner tout | ||
|---|---|---|
Marque Trinamic | ||
Series 1160 | ||
Sub Type Stepper Motor | ||
Product Type Stepper Motor | ||
Voltage 48 V | ||
Holding Torque 1.01 Nm | ||
Step Angle 1.8 ° | ||
Frame Size 60 x 60 mm | ||
Shaft Diameter 6.35 mm | ||
Current Rating 2.8 A | ||
Depth 60 mm | ||
Distrelec Product Id 15422027 | ||
Length 75 mm | ||
Resistance Per Phase 0.83 Ω | ||
Shaft Length 24 mm | ||
Standards/Approvals REACH, RoHS | ||
Width 60 mm | ||
Winding Arrangement Bipolar | ||
- Pays d'origine :
- MY
The stepper motor system is compatible with two-phase stepper motors like NEMA 23/24, supporting both host and standalone operation modes. Programmed using TMCL (Trinamic Motion Control Language), it offers a program memory capable of storing up to 2048 TMCL commands. It can be programmed and controlled via USB, RS485, and CAN interfaces. Equipped with stallGuard2 and cool Step technologies, it enables sensor less load angle detection and current control for optimized performance. Additionally, it features a sensOstep encoder for precise position detection with 1024 counts per revolution. Input options include step/direction (opto-isolated), three reference/limit switch inputs, and two digital outputs (24V, open drain). Furthermore, it provides two inputs, which can interpret analogue (0-10V) or digital (5V/24V) signals, and an ABN encoder interface for enhanced functionality.
Rohs compliant
Gross weight 624 gram
Dimensions 125 x 85 x 60 mm
Liens connexes
- Trinamic QSH5718 Series Stepper Motor Stepper Motor 2.3V 1.8 ° 6.35 mm Shaft
- Trinamic PANdrive Series Stepper Motor Stepper Motor 54V 1.8 ° 8 mm Shaft
- Trinamic PANdrive Series Stepper Motor Stepper Motor 4.17V 1.8 °, 60 x 60 mm Frame
- Trinamic 60 W 30 V 2A Stepper Motor Controller, Motion Function
- Trinamic PD42-x-1140 Series Stepper Motor Unit Stepper Motor 28V 42.3 x 42.3 mm Frame, 5 mm Shaft
- Trinamic PD42 Series Stepper Motor Unit Stepper Motor 30V 1.8 ° 5 mm Shaft
- Trinamic PANdrive Series Stepper Motor Unit Stepper Motor 30V 1.8 ° 5 mm Shaft
- Trinamic Connection Cable TMCM Series Cable for Use with TMCM-1160 Stepper Motor Controller/Driver