Festo EMMT Series Hybrid Stepper Motor 48V, 1.12Nm Torque, 1.8 °, 57 mm Frame, 6.35 mm Shaft

N° de stock RS:: 827-245
Référence fabricant:: EMMT-ST-57-M-RS
Fabricant:: Festo

Festo EMMT Series Hybrid Stepper Motor 48V, 1.12Nm Torque, 1.8 °, 57 mm Frame, 6.35 mm Shaft

Sous-total (1 unité)*

262,87 €

(TVA exclue)

318,07 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Stocké-e par le fabricant

Prêt à être expédié à partir du 16 novembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	262,87 €

*Prix donné à titre indicatif

N° de stock RS:: 827-245
Référence fabricant:: EMMT-ST-57-M-RS
Fabricant:: Festo

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Festo
	Sub Type	Hybrid
	Product Type	Stepper Motor
	Step Angle	1.8°
	Holding Torque	1.12Nm
	Voltage	48V
	Frame Size	57 mm
	Mount Type	Any Position
	Shaft Diameter	6.35mm
	Current Rating	5.4A
	Winding Arrangement	Bipolar
	IP Rating	IP65
	Shaft Length	21mm
	Number of Pole Pairs	50
	Length	110.1mm
	Depth	57mm
	Standards/Approvals	CE, cULus, IEC 60034, RCM, RoHS, UL E342973
	Width	57mm
	Resistance Per Phase	0.17Ω
	Output Speed	1000rpm
	Series	EMMT
	Detent Torque	1.12nm

	Sélectionner tout
	Marque Festo
	Sub Type Hybrid
	Product Type Stepper Motor
	Step Angle 1.8°
	Holding Torque 1.12Nm
	Voltage 48V
	Frame Size 57 mm
	Mount Type Any Position
	Shaft Diameter 6.35mm
	Current Rating 5.4A
	Winding Arrangement Bipolar
	IP Rating IP65
	Shaft Length 21mm
	Number of Pole Pairs 50
	Length 110.1mm
	Depth 57mm
	Standards/Approvals CE, cULus, IEC 60034, RCM, RoHS, UL E342973
	Width 57mm
	Resistance Per Phase 0.17Ω
	Output Speed 1000rpm
	Series EMMT
	Detent Torque 1.12nm

Pays d'origine :: BG

Festo EMMT Series Stepper Motor, 48V Voltage, 1.12Nm Holding Torque - EMMT-ST-57-M-RS, Numeric Part Number: 8156174

This stepper motor is a compact, sealed hybrid actuator designed for precise position control in industrial settings. It operates at 48V and delivers synchronised stepping performance with a 1.8° step angle, suitable for applications requiring repeatable angular increments and moderate rotational speed. The unit is engineered for installation in any orientation and offers ingress protection for use in harsher environments.

Features and Benefits:

• 1.8° step angle provides accurate incremental positioning
• 5.4A current rating enables sustained drive capability
• 1.12Nm holding torque maintains static loads without drift
• 1000rpm output speed supports moderate-speed motion tasks
• IP65 ingress protection allows operation in dusty or wet conditions

Applications

• Suitable for conveyor indexing systems in factories
• Ideal for automated labelling and pick-and-place machines
• Used with rotary tables requiring repeatable angular steps
• Can be used for Camera pan mechanisms in enclosed environments
• Used for valve actuation where sealed operation is required

What shaft details affect coupling selection?

The shaft diameter is 6.35mm with a length of 21mm which determines rigid coupling and hub choice.

How does electrical impedance influence driver selection?

Resistance per phase is 0.17 Ω so drivers must accommodate low-impedance windings and appropriate current handling.

What certification indications are present for regulatory acceptance?

It carries CE, cULus, IEC 60034, RCM, RoHS and UL E342973 markings supporting recognised conformity.

Can it be mounted in different orientations without performance loss?

Yes

the mount type permits installation in any position while maintaining rated torque and speed.

How many magnetic pole pairs define its stepping resolution?

The device uses 50 pole pairs which contributes to its stepping characteristics and torque profile.