Références fabricant

RS PRO Non-Fused Terminal Block, 2-Way, 25mm² Wire Screw

N° de stock RS:: 868-0761
Fabricant:: RS PRO

RS PRO Non-Fused Terminal Block, 2-Way, 25mm² Wire Screw

Sous-total (1 unité)*

18,46 €

(TVA exclue)

22,34 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

Plus 15 unité(s) expédiée(s) à partir du 16 novembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	18,46 €

*Prix donné à titre indicatif

N° de stock RS:: 868-0761
Fabricant:: RS PRO

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	RS PRO
	Product Type	Non-Fused Terminal Block
	Number of Ways	2
	Wire Size	25mm²
	Mount Type	Cable
	Fused	No
	Contact Material	Nickel Plated Brass
	Material	Polycarbonate
	Voltage	450V
	Wire Protection	No
	Colour	Transparent Blue
	Cable CSA	25mm²
	Termination Type	Screw
	Minimum Operating Temperature	85°C
	Maximum Operating Temperature	85°C
	Enclosed	Yes
	Standards/Approvals	No
	Hazardous Area Certification	IEC/EN 60695-2-11
	Contact Plating	Nickel

	Sélectionner tout
	Marque RS PRO
	Product Type Non-Fused Terminal Block
	Number of Ways 2
	Wire Size 25mm²
	Mount Type Cable
	Fused No
	Contact Material Nickel Plated Brass
	Material Polycarbonate
	Voltage 450V
	Wire Protection No
	Colour Transparent Blue
	Cable CSA 25mm²
	Termination Type Screw
	Minimum Operating Temperature 85°C
	Maximum Operating Temperature 85°C
	Enclosed Yes
	Standards/Approvals No
	Hazardous Area Certification IEC/EN 60695-2-11
	Contact Plating Nickel

Pays d'origine :: IT

Twin Blocks with Indirect Clamping

The use of Twin-Block terminals is recommended to connect flexible copper cables from 10 to 120 sq.mm, ideal for applications in channels or conduits due to their compact size and ease of installation.

These Twin Block connectors guarantee a high degree of mechanical resistance and dielectric strength, and protection to IP 20 as required by CEI 64-8 part 5.

The particular structure and the clamping system allows you to make connections with a large contact area, without damage to the main conductor strands.

Twin-Blocks consist of:

Terminal screws in brass and steel with nickel plating and galvanizing treatmentsto protect against corrosion.and also provides increased protection in ammonia environments. The insulating body is made of self-extinguishing polycarbonate according to UL 94-V0, with a high degree of isolation. Clips to close and secure the connector are easy to operate and do not require the use of tools.

Multiple connections can be made in a single Twin Block if the total number of strands and area does not exceed the maximum permitted for a single conductor. The obvious advantage is the reduction of the number of blocks required and the corresponding ease and speed of installation.

Housing material: trasparent blue polycarbonate

Self-extinguishing: UL 94 - V0; IEC 695-2-1 a 850 °C; IEC 695-2-2

Operational peak temperature: 85 °C

Clamps: nickel plated brass

Screws: galvanized steel

Voltage rating: 450 V

Voltage test: 2500 V

Protection degree: IP 20

Standards

CEI EN 60998-1
CEI EN 60998-2-1
CEI EN 60999
CEI EN 60947-7-1

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.