SKF 17 Tooth Rough Stock Bore Sprocket, PHS 40-1BH17 40-1

Voir l’ensemble des Sprockets

Sous-total (1 unité)*

5,75 €

(TVA exclue)

6,96 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 4 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +5,75 €

*Prix donné à titre indicatif

N° de stock RS:
267-9565
Référence fabricant:
PHS 40-1BH17
Fabricant:
SKF
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

SKF

Bore Diameter

36.58mm

Product Type

Sprocket

Number of Teeth

17

Bore Type

Rough Stock Bore

Pitch Diameter

12.7mm

Material

Steel

Hub Diameter

54.1mm

Sprocket Width

25.4mm

Maximum Inside Diameter

36.58mm

Acceptable Chain Type

40-1

Outside Diameter

75.69mm

Standards/Approvals

ANSI

Pays d'origine :
CN

SKF Sprocket, 17 Teeth, 75.69mm Outside Diameter - PHS 40-1BH17


This sprocket is a steel-hubbed component designed to transmit rotary motion in chain-driven systems, configured with a rough stock bore for on-site machining. It interfaces with a 40-1 roller chain and is intended for industrial power transmission where a hubbed sprocket with a substantial hub diameter is required.

Features and Benefits:


• 17 teeth provide consistent engagement with chain links for steady drive
• ANSI approval ensures compatibility with recognised chain standards
• Steel construction offers structural strength for continuous operation
• Rough stock bore permits customisation to shaft dimensions on site
• 25.4mm width supports lateral load distribution in chain runs

Applications


• Suitable for replacing worn sprockets in 40-1 chain drives
• Used with industrial conveyors requiring hubbed sprockets
• Ideal for retrofit projects needing a rough bore for machining
• Can be used for light-to-moderate power transmission systems
• Used for workshop fabrication where bore adaptation is needed

What bore arrangement allows shaft adaptation?


The component is supplied with a rough stock bore enabling machined finishing to match the shaft diameter precisely.

How does the hub design affect installation?


The hub diameter of 54.1mm provides a solid mounting area for set screws or press-fit arrangements depending on installation practice.

What internal clearance limits should be considered?


The maximum inside diameter is 36.58mm which defines the largest shaft or hub component that can be accommodated before machining.

Which chain type will this engage with?


It is intended for use with 40-1 roller chain, ensuring correct pitch and link engagement.

What dimensional parameter governs sprocket-to-chain spacing?


The pitch diameter of 12.7mm determines the effective sprocket spacing for accurate chain meshing.

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.