SKF 48 Tooth Rough Stock Bore Sprocket, PHS 08B-1B48 08 B-1
- N° de stock RS:
- 267-9141
- Référence fabricant:
- PHS 08B-1B48
- Fabricant:
- SKF
Sous-total (1 unité)*
25,14 €
(TVA exclue)
30,42 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 17 décembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 25,14 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 267-9141
- Référence fabricant:
- PHS 08B-1B48
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Bore Diameter | 16mm, 64mm | |
| Product Type | Sprocket | |
| Number of Teeth | 48 | |
| Bore Type | Rough Stock Bore | |
| Pitch Diameter | 194.18mm | |
| Material | Steel | |
| Hub Diameter | 90mm | |
| Sprocket Width | 40mm | |
| Acceptable Chain Type | 08 B-1 | |
| Maximum Inside Diameter | 64mm | |
| Standards/Approvals | BS EN | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Bore Diameter 16mm, 64mm | ||
Product Type Sprocket | ||
Number of Teeth 48 | ||
Bore Type Rough Stock Bore | ||
Pitch Diameter 194.18mm | ||
Material Steel | ||
Hub Diameter 90mm | ||
Sprocket Width 40mm | ||
Acceptable Chain Type 08 B-1 | ||
Maximum Inside Diameter 64mm | ||
Standards/Approvals BS EN | ||
- Pays d'origine :
- CN
SKF Sprocket, 48 Teeth, 194.18mm Pitch Diameter - PHS 08B-1B48
This sprocket is a toothed drive component designed for power transmission with 08B-1 roller chains in industrial systems. Manufactured from steel, it is intended for integration into mechanical drives where chain engagement and torque conveyance are required. The unit conforms to BS EN standards and suits applications demanding standardised sprocket geometry and material robustness.
Features and Benefits:
• 48 teeth deliver consistent chain engagement and load transfer
• 194.18mm pitch diameter ensures precise chain tracking
• Steel construction offers wear resistance under cyclic loading
• 40mm hub width supports stable lateral chain guidance
• Hub diameter 90mm provides secure mounting for coupled assemblies
• 194.18mm pitch diameter ensures precise chain tracking
• Steel construction offers wear resistance under cyclic loading
• 40mm hub width supports stable lateral chain guidance
• Hub diameter 90mm provides secure mounting for coupled assemblies
Applications
• Suitable for conveyor drives in automation lines
• Ideal for reduction drives in electrical motor assemblies
• Used with timing chains in mechanical handling equipment
• Can be used for retrofit replacements in industrial gear trains
• Ideal for reduction drives in electrical motor assemblies
• Used with timing chains in mechanical handling equipment
• Can be used for retrofit replacements in industrial gear trains
What bore options are available to fit various shafts?
The component is supplied with a rough stock bore that can be machined to final diameters between 16mm and 64mm to match shaft tolerances.
How does the internal diameter limit affect compatibility?
The maximum inside diameter is 64mm, which defines the largest shaft size after finishing that can be accommodated without additional adaptors.
What chain type does it engage and how does that influence selection?
It is designed for 08 B-1 chain engagement, so selection should match chain pitch class to maintain correct articulation and service life.
Are there mounting considerations due to hub proportions?
The 90mm hub diameter concentrates mounting forces centrally, so fastener design and hub fitment should account for imposed radial and axial loads.
Liens connexes
- SKF 32 Tooth Rough Stock Bore Sprocket, PHS 08B-1B32 08 B-1
- SKF 16 Tooth Rough Stock Bore Sprocket, PHS 08B-2BH16 08 B-2
- SKF 23 Tooth Rough Stock Bore Sprocket, PHS 08B-2BH23 08 B-2
- SKF 24 Tooth Rough Stock Bore Sprocket, PHS 08B-1BH24 08 B-1
- SKF 12 Tooth Rough Stock Bore Sprocket, PHS 08B-2BH12 08 B-2
- SKF 30 Tooth Rough Stock Bore Sprocket, PHS 08B-1B30 08 B-1
- SKF 31 Tooth Rough Stock Bore Sprocket, PHS 08B-1B31 08 B-1
- SKF 28 Tooth Rough Stock Bore Sprocket, PHS 08B-2B28 08 B-2
