SKF 28 Tooth Rough Stock Bore Sprocket, PHS 12B-2B28 12 B-2
- N° de stock RS:
- 267-8913
- Référence fabricant:
- PHS 12B-2B28
- Fabricant:
- SKF
Sous-total (1 unité)*
57,95 €
(TVA exclue)
70,12 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 17 décembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 57,95 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 267-8913
- Référence fabricant:
- PHS 12B-2B28
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Sprocket | |
| Number of Teeth | 28 | |
| Bore Diameter | 80mm | |
| Bore Type | Rough Stock Bore | |
| Pitch Diameter | 170.13mm | |
| Material | Steel | |
| Hub Diameter | 120mm | |
| Sprocket Width | 50mm | |
| Maximum Inside Diameter | 80mm | |
| Acceptable Chain Type | 12 B-2 | |
| Standards/Approvals | BS, EN | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Sprocket | ||
Number of Teeth 28 | ||
Bore Diameter 80mm | ||
Bore Type Rough Stock Bore | ||
Pitch Diameter 170.13mm | ||
Material Steel | ||
Hub Diameter 120mm | ||
Sprocket Width 50mm | ||
Maximum Inside Diameter 80mm | ||
Acceptable Chain Type 12 B-2 | ||
Standards/Approvals BS, EN | ||
- Pays d'origine :
- CN
SKF Sprocket, 28 Teeth, 50mm Width - PHS 12B-2B28
This sprocket is a steel transmission component designed to drive roller and conveyor chains in industrial power-transfer systems. It interfaces with 12B-2 chain types and is supplied with a rough-stock bore to permit final machining for precise shaft fit. The component includes a central hub and tooth profile intended for meshing in continuous-drive arrangements and complies with specified British and European standards.
Features and Benefits:
• Steel construction offers high wear resistance during continuous operation
• Rough-stock bore allows custom machining to EXACT shaft tolerances
• 28 teeth provide consistent engagement for steady motion transfer
• Compatible with 12B-2 chain to ensure correct chain meshing
• 50 mm width supports higher load distribution across the chain
• Rough-stock bore allows custom machining to EXACT shaft tolerances
• 28 teeth provide consistent engagement for steady motion transfer
• Compatible with 12B-2 chain to ensure correct chain meshing
• 50 mm width supports higher load distribution across the chain
Applications
• Suitable for conveyor systems requiring continuous chain drive
• Used with industrial 12B-2 chain assemblies in factories
• Ideal for retrofitting drive trains that need custom bore finishing
• Can be used for heavy-duty material-handling equipment
• Used with industrial 12B-2 chain assemblies in factories
• Ideal for retrofitting drive trains that need custom bore finishing
• Can be used for heavy-duty material-handling equipment
What bore preparation is required before installation?
The rough-stock bore requires machining to the shaft diameter and keyway specifications on site prior to final assembly.
How does the hub Interface affect mounting stability?
The 120 mm hub diameter provides a substantial contact area for hub-to-shaft coupling and support during torque transmission.
What limitation does the internal clearance impose on shaft choice?
The maximum inside diameter of 80 mm dictates the largest shaft section that can pass through or be accommodated within the bore.
How does the pitch diameter influence chain selection?
The 170.13 mm pitch diameter determines the chain wrap and centre-distance relationships and should match sprocket-pair geometry for correct chain tension.
Which standards relate to material and dimensional conformity?
The component is produced to meet the listed BS and EN approvals governing dimensional and material criteria.
Liens connexes
- SKF 28 Tooth Rough Stock Bore Sprocket, PHS 08B-2B28 08 B-2
- SKF 28 Tooth Rough Stock Bore Sprocket, PHS 12B-1B28 12 B-1
- SKF 23 Tooth Rough Stock Bore Sprocket, PHS 20B-2BH23 12B
- SKF 21 Tooth Rough Stock Bore Sprocket, PHS 12B-2BH21 12 B-2
- SKF 36 Tooth Rough Stock Bore Sprocket, PHS 12B-2B36 12 B-2
- SKF 25 Tooth Rough Stock Bore Sprocket, PHS 12B-2BH12 12 B-2
- SKF 9 Tooth Rough Stock Bore Sprocket, PHS 12B-1BH9 12 B-1
- SKF 26 Tooth Rough Stock Bore Sprocket, PHS 12B-1B26 12 B-1
