SKF 15 Tooth Pilot Bore Sprocket, PHS 12B-1A15 12 B-1
- N° de stock RS:
- 267-8855
- Référence fabricant:
- PHS 12B-1A15
- Fabricant:
- SKF
Sous-total (1 unité)*
5,93 €
(TVA exclue)
7,18 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 1 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 5,93 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 267-8855
- Référence fabricant:
- PHS 12B-1A15
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Bore Diameter | 14mm | |
| Product Type | Sprocket | |
| Number of Teeth | 15 | |
| Bore Type | Pilot Bore | |
| Pitch Diameter | 91.63mm | |
| Material | Steel | |
| Acceptable Chain Type | 12 B-1 | |
| Maximum Inside Diameter | 14mm | |
| Standards/Approvals | BS, EN | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Bore Diameter 14mm | ||
Product Type Sprocket | ||
Number of Teeth 15 | ||
Bore Type Pilot Bore | ||
Pitch Diameter 91.63mm | ||
Material Steel | ||
Acceptable Chain Type 12 B-1 | ||
Maximum Inside Diameter 14mm | ||
Standards/Approvals BS, EN | ||
- Pays d'origine :
- CN
SKF Sprocket, 91.63mm Pitch Diameter, 15 Teeth - PHS 12B-1A15
This sprocket is a steel timing component designed to transmit rotary motion within chain-driven systems, offering compatibility with specified chain formats and manufactured to recognised British and European standards. It serves as an Interface between a drive source and a 12B-1 roller chain where accurate tooth engagement is required.
Features and Benefits:
• 15 teeth provide consistent engagement for smooth drive performance
• Pilot bore allows precise mounting on mating shafts for alignment
• 91.63mm pitch diameter maintains correct chain geometry under load
• Steel construction delivers structural strength for industrial duty
• Maximum inside diameter14mm supports clearance for shaft fittings
• Pilot bore allows precise mounting on mating shafts for alignment
• 91.63mm pitch diameter maintains correct chain geometry under load
• Steel construction delivers structural strength for industrial duty
• Maximum inside diameter14mm supports clearance for shaft fittings
Applications
• Suitable for conveyor drive assemblies using 12B-1 chain
• Used with transmission systems requiring pilot bore mounting
• Ideal for retrofitting machinery that follows BS and EN norms
• Can be used for power transfer in light industrial equipment
• Used for sprocket replacements where 15-tooth count is required
• Used with transmission systems requiring pilot bore mounting
• Ideal for retrofitting machinery that follows BS and EN norms
• Can be used for power transfer in light industrial equipment
• Used for sprocket replacements where 15-tooth count is required
Which chain type will mesh correctly with this component?
It is compatible with a 12B-1 roller chain specified for this tooth profile.
How does the bore form affect assembly alignment?
The pilot bore locates on the shaft to reduce radial play and improve concentricity.
What material properties influence load capacity?
The steel body provides tensile strength and wear resistance suitable for routine mechanical loads.
Which standards relate to its manufacture and suitability?
It conforms to BS and EN approvals referenced for dimensional and material expectations.
Liens connexes
- SKF 11 Tooth Pilot Bore Sprocket, PHS 12B-1A11 12 B-1
- SKF 32 Tooth Pilot Bore Sprocket, PHS 12B-1A32 12 B-1
- SKF 19 Tooth Taper Sprocket, PHS 12B-1TBH19 12 B-1
- SKF 22 Tooth Rough Sprocket, PHS 12B-2BH22 12 B-2
- SKF 20 Tooth Taper Sprocket, PHS 12B-1TBH20 12 B-1
- SKF 20 Tooth Rough Sprocket, PHS 12B-1BH20 12 B-1
- SKF 13 Tooth Rough Sprocket, PHS 12B-1BH13 12 B-1
- SKF 25 Tooth Taper Sprocket, PHS 12B-1TBH25 12 B-1