RS PRO Heat Shrink Splice Connector, Blue, Insulated 14 AWG
- N° de stock RS:
- 458-0718
- Fabricant:
- RS PRO
Offre groupée disponible
Consulter les options de prix de grosSous-total (10 unités, dans un sac de 10)*
9,65 €
(TVA exclue)
11,68 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 3 500 unité(s) prête(s) à être expédiée(s)
- Plus 11 700 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 1 000 unité(s) expédiée(s) à partir du 15 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | Le Sachet* |
|---|---|---|
| 10 - 140 | 0,965 € | 9,65 € |
| 150 - 490 | 0,915 € | 9,15 € |
| 500 + | 0,868 € | 8,68 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 458-0718
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Splice Type | Heat Shrink | |
| Product Type | Splice Connector | |
| Overall Length | 37mm | |
| Minimum Wire Size mm² | 1.5mm² | |
| Minimum Wire Size AWG | 15AWG | |
| Maximum Wire Size AWG | 14AWG | |
| Maximum Wire Size mm² | 2.5mm² | |
| Insulation | Insulated | |
| Colour | Blue | |
| Insulation Material | Polyolefin | |
| Series | RS PRO | |
| Contact Material | Copper | |
| Termination Type | Crimp | |
| Standards/Approvals | RoHS Compliant | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Splice Type Heat Shrink | ||
Product Type Splice Connector | ||
Overall Length 37mm | ||
Minimum Wire Size mm² 1.5mm² | ||
Minimum Wire Size AWG 15AWG | ||
Maximum Wire Size AWG 14AWG | ||
Maximum Wire Size mm² 2.5mm² | ||
Insulation Insulated | ||
Colour Blue | ||
Insulation Material Polyolefin | ||
Series RS PRO | ||
Contact Material Copper | ||
Termination Type Crimp | ||
Standards/Approvals RoHS Compliant | ||
RS PRO Heat Shrink Crimp Splices
These high quality, watertight crimp splices from RS PRO are made from a transparent coloured polyolefin material, the colour being dependent upon the size of the wire they are suitable for.
Each crimp splice is covered with a dual wall heat shrinkable tubing and have a hot melt able inner liner, which when heat is applied shrinks to form a watertight seal when terminating or connecting any wires or cable together.
The crimp splice heat shrink tubing offers excellent strain relief, it is both solvent and moisture resistant, as well as offering good physical and electrical properties.
Features and Benefits
• The tubing can be used at a high operating temperature from -55 to 125 °C
• The heat shrink tube can be installed very quickly
• Safe and easy to use
• Minimum shrink temperature of the tubing is 150°C
• Watertight crimp splice tube
• Easy to visually inspect
• Voltage rating 600 V
• Heat shrink ratio of 1:1
See also RS Pro Heat Shrink Tubing Service Kit Stock No. 458-0645
For suitable RS Pro Crimp Tool, see Stock No. 499-2313
Splices
Standards
MIL - H - 5606; MIL - L - 23699; MIL - L - 7808; MIL - A - 8243