TE Connectivity, D-436 Parallel Splice Connector, Red, Insulated, Tin 16 AWG
- N° de stock RS:
- 136-4681
- Référence fabricant:
- D-436-0128
- Fabricant:
- TE Connectivity
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 paquet de 10 unités)*
63,49 €
(TVA exclue)
76,82 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 340 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 2 500 unité(s) expédiée(s) à partir du 19 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 10 - 40 | 6,349 € | 63,49 € |
| 50 + | 5,524 € | 55,24 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 136-4681
- Référence fabricant:
- D-436-0128
- Fabricant:
- TE Connectivity
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | TE Connectivity | |
| Splice Type | Parallel | |
| Product Type | Splice Connector | |
| Overall Length | 18.5mm | |
| Minimum Wire Size AWG | 14AWG | |
| Diameter | 1.27mm | |
| Minimum Wire Size mm² | 0.15mm² | |
| Maximum Wire Size AWG | 16AWG | |
| Maximum Wire Size mm² | 0.75mm² | |
| Insulation | Insulated | |
| Colour | Red | |
| Insulation Material | Polyvinyl Fluoride | |
| Contact Length | 19.77mm | |
| Series | D-436 | |
| Contact Material | Copper Alloy | |
| Contact Plating | Tin | |
| Termination Type | Crimp | |
| Standards/Approvals | RoHS | |
| Sélectionner tout | ||
|---|---|---|
Marque TE Connectivity | ||
Splice Type Parallel | ||
Product Type Splice Connector | ||
Overall Length 18.5mm | ||
Minimum Wire Size AWG 14AWG | ||
Diameter 1.27mm | ||
Minimum Wire Size mm² 0.15mm² | ||
Maximum Wire Size AWG 16AWG | ||
Maximum Wire Size mm² 0.75mm² | ||
Insulation Insulated | ||
Colour Red | ||
Insulation Material Polyvinyl Fluoride | ||
Contact Length 19.77mm | ||
Series D-436 | ||
Contact Material Copper Alloy | ||
Contact Plating Tin | ||
Termination Type Crimp | ||
Standards/Approvals RoHS | ||
- Pays d'origine :
- MX
TE Connectivity MiniSeal High Performance Immersion-Resistant Crimp Splices
MiniSeal high performance immersion-resistant crimp splices designed to provide long-term performance and excellent reliability in challenging environments. These MiniSeal splices have a lightweight, low profile design for use in applications where the need for space saving and environmental sealing is critical. MiniSeal splices consist of a plated copper crimp barrel, meltable inserts and a heat-shrinkable transparent sealing sleeve. The insulation sleeve provides environmental protection to the electrical connection against liquids such as hydraulic fluid, aviation fuel and lubrication fluids and the resulting chemical and galvanic corrosion. The heat-shrinkable sleeve also provides strain relief for the splice. Stock numbers with part numbers D-436-36/37/38 are MIL-S-81824/1 qualified and are suitable for use on aircraft, aerospace vehicles and similar applications where exposure to severe wind and high moisture occurs.
For suitable crimp tool see stock number 444-5693, a heating tool and reflector attachment must also be used.
Features and Benefits
Small and lightweight design
Easy one-step installation
Immersion resistant
Environmentally sealed against liquid penetration and resulting corrosion
Suitable for use in harsh environments
MIL spec M8184/1 versions available
Applications
These MiniSeal immersion resistant crimp splices are suitable for use in harsh environments within the aerospace and defence industries
Standards
MIL-S-81824/1