STAHLWILLE Ring Spanner 16 mm x 17 mm, 255mm Overall
- N° de stock RS:
- 737-0090
- Référence fabricant:
- 41041617
- Fabricant:
- STAHLWILLE
Sous-total (1 unité)*
25,52 €
(TVA exclue)
30,88 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 1 unité(s) prête(s) à être expédiée(s)
- Plus 2 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 25,52 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 737-0090
- Référence fabricant:
- 41041617
- Fabricant:
- STAHLWILLE
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STAHLWILLE | |
| Size | 16 mm x 17 mm | |
| Sub Type | Ring Spanner | |
| Product Type | Ring Spanner | |
| Unit of Measure | Metric | |
| VDE/1000V Approved | No | |
| Material | Chrome Alloy Steel | |
| Head Type | Offset | |
| Overall Length | 255mm | |
| Finish | Round | |
| Offset Angle | 15° | |
| Height Safe | No | |
| Number of Points | 6 | |
| Standards/Approvals | ISO 10104, ISO 7738, DIN 838, ISO 10102, DIN 3113, DIN 3110, DIN EN ISO 9001 | |
| Sélectionner tout | ||
|---|---|---|
Marque STAHLWILLE | ||
Size 16 mm x 17 mm | ||
Sub Type Ring Spanner | ||
Product Type Ring Spanner | ||
Unit of Measure Metric | ||
VDE/1000V Approved No | ||
Material Chrome Alloy Steel | ||
Head Type Offset | ||
Overall Length 255mm | ||
Finish Round | ||
Offset Angle 15° | ||
Height Safe No | ||
Number of Points 6 | ||
Standards/Approvals ISO 10104, ISO 7738, DIN 838, ISO 10102, DIN 3113, DIN 3110, DIN EN ISO 9001 | ||
Statut RoHS : Exempté
- Pays d'origine :
- DE
Stahlwille Ring Spanner, 16x17mm size, 255mm Overall Length - 41041617
This ring spanner is a hand tool designed for fastening and loosening hexagonal nuts and bolts in industrial environments. It combines a dual-size boxed end with an angled head profile to access confined or recessed fasteners while maintaining contact across six grip points. The tool is suited to metric systems and intended for professional tasks in automation, electronics, electrical and mechanical workshops.
Features and Benefits:
• Chrome finish resists surface corrosion and eases cleaning
• 6-point profile reduces rounding and increases contact stability
• Offset head at 15° improves access to tight or obstructed fasteners
• Precision manufacturing conforms to ISO tolerances for accurate fit
• Chrome alloy steel construction delivers dependable torque transfer
• 6-point profile reduces rounding and increases contact stability
• Offset head at 15° improves access to tight or obstructed fasteners
• Precision manufacturing conforms to ISO tolerances for accurate fit
• Chrome alloy steel construction delivers dependable torque transfer
Applications
• Suitable for assembly and maintenance of control cabinets in automation
• Used for tightening panel fixings in electrical enclosures
• Ideal for mechanical plant maintenance where recessed nuts occur
• Can be used for repair and installation tasks on electronic housings
• Used for tightening panel fixings in electrical enclosures
• Ideal for mechanical plant maintenance where recessed nuts occur
• Can be used for repair and installation tasks on electronic housings
What sizes does the tool provide at its ends?
It offers two metric boxed sizes, 16mm and 17 mm, on opposite ends for quick changes between adjacent fastener dimensions.
How long is the span of the tool and why does that matter?
The overall length is 255mm which gives additional leverage for increased torque when working on stubborn fasteners.
Which material family composes the body and what is the result?
The bar is MADE from chrome-alloy steel, providing a balance of strength and resistance to wear during repeated use.
Which design standards has it been produced against?
Manufacturing and dimensional aspects comply with standards including ISO 10104, ISO 7738, DIN 838, ISO 10102, DIN 3113, DIN 3110 and DIN EN ISO 9001.
Is the head orientation suited to offset applications?
Yes, the 15° angled head provides a small offset that helps reach fasteners obstructed by nearby components.
Standards
DIN 838; ISO 10104
Liens connexes
- STAHLWILLE Ring Spanner 17 mm x 19 mm, 270.00mm Overall
- STAHLWILLE Ratchet Ring Spanner 17 x 19 mm, 205mm Overall
- STAHLWILLE Ring Spanner 16 mm x 18 mm, 200mm Overall
- STAHLWILLE Combination Ratchet Spanner Chrome Plated, 255mm Overall 19 mm x 19 mm
- STAHLWILLE Combination Spanner 17 mm, 240.00 mm Overall
- STAHLWILLE Ring Spanner 3/8 x 7/16 inch, 215 mm Overall
- Facom Ring Spanner 16 x 17 mm, 210 mm Overall
- STAHLWILLE Combination Ratchet Spanner Round, 229mm Overall 17 mm x 17 mm