Infineon 5-Pin Microphone, Omni-Directional, Surface, Digital Output, PG-LLGA-5 1.62 V 3.6V
- N° de stock RS:
- 234-4638
- Référence fabricant:
- IM67D130AXTSA2
- Fabricant:
- Infineon
Sous-total (1 paquet de 2 unités)*
3,42 €
(TVA exclue)
4,14 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 632 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 2 + | 1,71 € | 3,42 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 234-4638
- Référence fabricant:
- IM67D130AXTSA2
- Fabricant:
- Infineon
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Infineon | |
| Technology | MEMS Microphone | |
| Product Type | Microphone | |
| Frequency Range | 2.9 to 3.3 MHz | |
| Output Type | Digital | |
| Directivity | Omni-Directional | |
| Sensitivity | 1kHz | |
| Signal to Noise Ratio | 67dB | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 1.62V | |
| Maximum Supply Voltage | 3.6V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Package Type | PG-LLGA-5 | |
| Standards/Approvals | No | |
| Length | 4mm | |
| Pin Count | 5 | |
| Height | 1.5mm | |
| Port Location | Bottom | |
| Automotive Standard | AEC-Q103 | |
| Sélectionner tout | ||
|---|---|---|
Marque Infineon | ||
Technology MEMS Microphone | ||
Product Type Microphone | ||
Frequency Range 2.9 to 3.3 MHz | ||
Output Type Digital | ||
Directivity Omni-Directional | ||
Sensitivity 1kHz | ||
Signal to Noise Ratio 67dB | ||
Mount Type Surface | ||
Minimum Supply Voltage 1.62V | ||
Maximum Supply Voltage 3.6V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Package Type PG-LLGA-5 | ||
Standards/Approvals No | ||
Length 4mm | ||
Pin Count 5 | ||
Height 1.5mm | ||
Port Location Bottom | ||
Automotive Standard AEC-Q103 | ||
The Infineon high performance digital MEMS microphone is designed for applications where low self-noise, wide dynamic range, low distortions and a high acoustic overload point is required. The digital microphone contains an extremely low-noise preamplifier and a high-performance sigma-delta ADC. Different power modes can be selected in order to suit specific current consumption requirements.
Dynamic range of 103dB for best speech performance
Signal to noise ratio of 67dB
<1% total harmonic distortions up to high SPL levels
Acoustic overload point at 130dBSPL
Automotive qualification
Close sensitivity and phase matching for use in arrays
Flat frequency response with low frequency roll off and very fast analog to digital conversion speed for best ANC performance
Digital PDM output
Extended availability to match automotive design cycles
Liens connexes
- Infineon 5-Pin Microphone Surface PG-LLGA-5 1.62 V 3.6V
- Infineon 5-Pin Microphone Surface LLGA 3.6 V 3.6V
- Infineon 5-Pin Microphone PCB LLGA 3.6 V 3.6V
- Infineon 5-Pin Microphone Analogue Output, PG-LLGA-5 1.52 V 3V
- Infineon 5-Pin Microphone Surface LGA 1.62 V 3.6V
- Infineon 5-Pin Microphone Surface TLGA 1.62 V 3.6V
- Infineon 5-Pin Sound Sensor Surface PG-TLGA-5-6 1.62 V 3.6V
- Infineon 5-Pin Microphone Surface PG-TLGA-5-6 3.6 V 3.6V