STMicroelectronics 5-Pin Sound Sensor, Omni-Directional, Surface, Analogue Output, RHLGA-5L 1.52 V 3.6 V
- N° de stock RS:
- 208-5070
- Référence fabricant:
- IMP23ABSUTR
- Fabricant:
- STMicroelectronics
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 208-5070
- Référence fabricant:
- IMP23ABSUTR
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Technology | MEMS Microphone | |
| Product Type | Sound Sensor | |
| Frequency Range | 2.9 to 3.6 MHz | |
| Output Type | Analogue | |
| Directivity | Omni-Directional | |
| Sensitivity | 1kHz | |
| Signal to Noise Ratio | 64dB | |
| Minimum Supply Voltage | 1.52V | |
| Mount Type | Surface | |
| Maximum Supply Voltage | 3.6V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Package Type | RHLGA-5L | |
| Standards/Approvals | No | |
| Length | 3.5mm | |
| Height | 1.08mm | |
| Pin Count | 5 | |
| Port Location | Bottom | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Technology MEMS Microphone | ||
Product Type Sound Sensor | ||
Frequency Range 2.9 to 3.6 MHz | ||
Output Type Analogue | ||
Directivity Omni-Directional | ||
Sensitivity 1kHz | ||
Signal to Noise Ratio 64dB | ||
Minimum Supply Voltage 1.52V | ||
Mount Type Surface | ||
Maximum Supply Voltage 3.6V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Package Type RHLGA-5L | ||
Standards/Approvals No | ||
Length 3.5mm | ||
Height 1.08mm | ||
Pin Count 5 | ||
Port Location Bottom | ||
Automotive Standard No | ||
The STMicroelectronics IMP23ABSU is a compact, low-power microphone built with a capacitive sensing element and an IC interface. The sensing element, capable of detecting acoustic waves, is manufactured using specialized silicon micromachining process to produce audio sensors.
Omnidirectional sensitivity
High signal-to-noise ratio
High acoustic overload point: 130 dBSPL typ.
Package compliant with reflow soldering
Enhanced RF immunity
Ultra-flat frequency response
Ultrasound bandwidth (up to 80 kHz)
Low latency
Liens connexes
- STMicroelectronics 5-Pin Sound Sensor Surface RHLGA-5L 1.52 V 3.6 V
- Infineon 5-Pin Microphone Analogue Output, PG-LLGA-5 1.52 V 3 V
- Infineon Microphone Analogue Output 1.65 V 3.6 V
- Same Sky Sound Sensor Surface, Digital Output 1.6 V 3.6 V
- Infineon 5-Pin Sound Sensor Surface LLGA 1.8 V 3.6 V
- Infineon 5-Pin Sound Sensor Surface PG-TLGA-5-6 1.62 V 3.6 V
- Infineon 5-Pin Microphone PCB LLGA 3.6 V 3.6 V
- Infineon 5-Pin Microphone Surface LLGA 3.6 V 3.6 V