Sensata Crydom Solid State Relay, 7.6 A Load, DIN Rail Mount

Voir la catégorie

Sous-total (1 unité)*

103,42 €

(TVA exclue)

125,14 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 1 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
  • Plus 10 unité(s) expédiée(s) à partir du 24 février 2026
  • Plus 10 unité(s) expédiée(s) à partir du 17 mars 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +103,42 €

*Prix donné à titre indicatif

N° de stock RS:
822-9357
Numéro d'article Distrelec:
110-84-803
Référence fabricant:
DRC3P48D420R2
Fabricant:
Sensata / Crydom
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Sensata / Crydom

Maximum Load Current

7.6 A

Mounting Type

DIN Rail Mount

Control Voltage Range

18 → 30V ac/dc

Number of Poles

3

Terminal Type

Screw

Load Voltage Range

48 → 510V ac

Depth

96.02mm

Maximum Operating Temperature

+80°C

Minimum Operating Temperature

-30°C

Height

86.71mm

Length

45.31mm

Pays d'origine :
MX

Crydom DRC Series Solid State Contactors


Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.

7.6 Amp Motor Controller rated Solid State Contactor
Load voltage range up to 530 VAC
Fits standard 35 mm DIN rail
LED input status indicator
AC or DC control
Zero crossing (resistive loads) or instantaneous turn-on (inductive loads) output
Built in Overvoltage Protection
Ultra-efficient thermal management design (Patented)
C-UL-US Listed, IEC Rated, CE & RoHS Compliant, Horsepower Rated
Embedded auxiliary contacts
DRC3R has reversing control (DRC3R includes On/Off and Forward/Reverse control in a compact 45 mm package)
Output terminals designed for an easy connection to multiple motor connections in parallel for a total up to 5 HP @ 480 Vac
Very low input control current
UL Listed, IEC60947-2 standard package

Note

The reversing option has dual control inputs.


Solid State Contactors

Liens connexes