Murrelektronik Limited Solid State Interface Relay 10V dc, 35 V dc DIN Rail Screw
- N° de stock RS:
- 918-7011
- Référence fabricant:
- 52503
- Fabricant:
- Murrelektronik Limited
Sous-total (1 unité)*
67,13 €
(TVA exclue)
81,23 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 20 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 67,13 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 918-7011
- Référence fabricant:
- 52503
- Fabricant:
- Murrelektronik Limited
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Murrelektronik Limited | |
| Product Type | Solid State Interface Relay | |
| Maximum Input Current | 10mA | |
| Maximum Operating Temperature | 60°C | |
| Minimum Operating Temperature | -20°C | |
| Switching Voltage | 10V dc, 35V dc | |
| Mount Type | DIN Rail | |
| Switching Current | 2A, 1A | |
| Terminal Type | Screw | |
| LED Display | Yes | |
| Isolation Voltage | 3.75kV | |
| Standards/Approvals | RoHS | |
| Rise Time | 90μs | |
| Length | 90mm | |
| Depth | 65mm | |
| Width | 6.2mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Murrelektronik Limited | ||
Product Type Solid State Interface Relay | ||
Maximum Input Current 10mA | ||
Maximum Operating Temperature 60°C | ||
Minimum Operating Temperature -20°C | ||
Switching Voltage 10V dc, 35V dc | ||
Mount Type DIN Rail | ||
Switching Current 2A, 1A | ||
Terminal Type Screw | ||
LED Display Yes | ||
Isolation Voltage 3.75kV | ||
Standards/Approvals RoHS | ||
Rise Time 90μs | ||
Length 90mm | ||
Depth 65mm | ||
Width 6.2mm | ||
- Pays d'origine :
- CZ
MIRO TR DIN Rail Optocoupler
MIRO TR Optocouplers are used to combine different signal levels or to isolate one signal from another. They provide an optoelectronic signal transfer between input and output, and therefore, never wear out.
• DIN Rail mounting
• Compact, 6.2 mm width
• Made to last
• No mechanical wear
• Silent operation
• No contact bounce times
• Short switching times
• Models with switching frequencies up to 500 kHz
• Shock and vibration resistant
• Low input power
• LED (yellow) input display
• Spring clamp or screw terminals
Liens connexes
- Murrelektronik Limited Solid State Interface Relay 10V dc, 35 V dc DIN Rail Spring Clamp
- Murrelektronik Limited Solid State Interface Relay 48V DIN Rail Screw
- Murrelektronik Limited Solid State Interface Relay 48V dc, 5 V dc DIN Rail Screw
- Murrelektronik Limited MIRO 6.2 Solid State Interface Relay 48V dc DIN Rail Screw
- Murrelektronik Limited MIRO Solid State Interface Relay 48V dc, 5 V dc DIN Rail Screw
- Murrelektronik Limited Solid State Interface Relay 48V dc, 5 V dc DIN Rail Spring Clamp
- Murrelektronik Limited MIRO TR Solid State Interface Relay 48V dc DIN Rail Spring Clamp
- Murrelektronik Limited MIRO TR Solid State Interface Relay 48V dc, 5 V dc DIN Rail Screw
