Omron G3RV-ST Solid State Interface Relay, Control:12V dc DIN Rail Screw

N° de stock RS:: 271-1885
Référence fabricant:: G3RV-ST700-A 12VDC
Fabricant:: Omron

Omron G3RV-ST Solid State Interface Relay, Control:12V dc DIN Rail Screw

Sous-total (1 unité)*

51,31 €

(TVA exclue)

62,09 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

4 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	51,31 €

*Prix donné à titre indicatif

N° de stock RS:: 271-1885
Référence fabricant:: G3RV-ST700-A 12VDC
Fabricant:: Omron

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Omron
	Maximum Control Voltage	12V dc

Sélectionner tout

Marque

Omron

Maximum Control Voltage

12V dc

Datasheet - G3RV-ST700-A 12VDC

Pays d'origine :: JP

Omron G3RV-ST Series Solid State Interface Relay, 2500V Isolation Voltage, 12VDC Input Voltage - G3RV-ST700-A 12VDC

This solid-state Interface relay provides Compact electrical isolation and switching for automation systems, enabling clean interfacing between PLC outputs and power circuits. Designed for DIN-rail mounting, it suits control panels where space is limited and consistent input signalling is required. An LED indicates input status to assist commissioning and diagnostics.

Features and Benefits:

• Isolation voltage 2500V for safer control-to-load separation • 12V DC input requiring only 15 mA for low-drive demands • Rise time 11 MS to limit inrush and reduce contact stress • Screw-terminal configuration for secure wiring connections • Wide ambient range -30°C to 55°C for varied site conditions • Standards approvals EN 62314, UL508, IEC 60529, CSA C22.2 No.14 supporting industrial use

Applications

• Suitable for PLC output isolation and signal conditioning in control cabinets • Ideal for retrofit of relay panels requiring DIN-rail solid-state relay 6.2mm screw-terminal footprint • Used with motor starter logic to provide noise-resistant switching • Can be used for indicator and alarm circuit interfacing with LED feedback

What mounting method is provided for panel installation?

It attaches to a DIN rail, enabling fast installation and straightforward replacement during maintenance.

How is input status verified on-site?

An integrated LED displays input activation, allowing Visual confirmation without test equipment.

How does it perform in electrically noisy environments?

The device offers 2500V isolation between control and load, helping to prevent interference propagation.

Which wiring approach is required for secure connections?

Terminals use screw-type clamps to ensure firm conductor retention suitable for industrial cabling.

What approvals indicate suitability for industrial applications?

It meets EN 62314, UL508, IEC 60529 and CSA C22.2 No.14 standards for relevant industrial requirements.