Weller ETL 2 mm Chisel Shape 43.5 mm Soldering Iron Tip for use with WEP70, LR20, LR21 (old generation)
- N° de stock RS:
- 179-707
- Numéro d'article Distrelec:
- 182-67-072
- Référence fabricant:
- 4ETL-1
- Fabricant:
- Weller
Sous-total (1 unité)*
6,55 €
(TVA exclue)
7,93 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 29 unité(s) prête(s) à être expédiée(s)
- Plus 136 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 6,55 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 179-707
- Numéro d'article Distrelec:
- 182-67-072
- Référence fabricant:
- 4ETL-1
- Fabricant:
- Weller
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Weller | |
| Tip Shape | Chisel Shape | |
| Model Number | ETL | |
| Product Type | Soldering Iron Tip | |
| For Use With | WEP70, LR20, LR21 (old generation) | |
| Tip Series | ET | |
| Tip Width | 2 mm | |
| Tip Length | 43.5mm | |
| Standards/Approvals | UPC | |
| Sélectionner tout | ||
|---|---|---|
Marque Weller | ||
Tip Shape Chisel Shape | ||
Model Number ETL | ||
Product Type Soldering Iron Tip | ||
For Use With WEP70, LR20, LR21 (old generation) | ||
Tip Series ET | ||
Tip Width 2 mm | ||
Tip Length 43.5mm | ||
Standards/Approvals UPC | ||
- Pays d'origine :
- MX
Weller Soldering Iron Tip, 43.5mm Tip Length, 2mm Tip Width - 4ETL-1
This soldering iron tip is a chisel‑shaped replacement element intended for precision soldering tasks in industrial and workshop settings. It is designed to fit a specific range of Weller handpieces from an earlier generation and is suitable for professionals working on electrical, electronics and mechanical assemblies who require a durable, flat‑edged tip for controlled heat transfer.
Features and Benefits:
• 2mm chisel profile for accurate solder joint wetting
• 43.5mm length for extended reach into assemblies
• UPC approval indicating recognised manufacturing traceability
• Compatible with older Weller irons for straightforward replacement
• Optimised tip geometry to aid steady solder flow
• 43.5mm length for extended reach into assemblies
• UPC approval indicating recognised manufacturing traceability
• Compatible with older Weller irons for straightforward replacement
• Optimised tip geometry to aid steady solder flow
Applications
• Suitable for replacing worn tips in WEP70 stations
• Ideal for reworking connectors on control panels
• Used with LR20 handpieces in maintenance operations
• Can be used for fine soldering on automation modules
• Used for repair tasks on legacy LR21 equipment
• Ideal for reworking connectors on control panels
• Used with LR20 handpieces in maintenance operations
• Can be used for fine soldering on automation modules
• Used for repair tasks on legacy LR21 equipment
Which handpieces will accept this tip?
It is MADE to fit certain older Weller handpieces, including models designated LR20 and LR21, and is compatible with the WEP70 station variant.
How does the tip shape affect soldering performance?
The flat chisel edge concentrates heat along a narrow band, improving solder transfer on leads and pads while allowing controlled solder distribution across joints.
What marking or approval denotes production oversight?
The component carries a UPC approval, which denotes an identified manufacturing and traceability standard.
Is this tip suitable for reach into confined assemblies?
Its 43.5mm length provides extra reach for accessing recessed components and tight enclosure interiors.
How does compatibility influence replacement choice?
Selecting this tip ensures mechanical and thermal fit with the specified older‑generation irons, simplifying servicing without modifying the tool.
Liens connexes
- Weller ETOL 0.8 mm Conical 43.5 mm Soldering Iron Tip for use with LR20 LR21 (old generation)
- Weller ETSL 0.4 mm Conical 43.5 mm Soldering Iron Tip for use with LR20 WEP70
- Weller Straight Soldering Iron Tip for use with LR21 (old generation) LR20
- Weller ET SMD Surface Mount Soldering Iron Tip for use with WEP70 LR21 (old generation)
- Weller ETSL 34.5 mm Screwdriver Soldering Iron Tip for use with WEP70 LR20
- Weller ETD Screwdriver 4.6 mm Soldering Iron Tip for use with LR20 LR21 (old generation)
- Weller 1.2 mm Bevel 34.5 mm Soldering Iron Tip for use with WEP70 LR21 (old generation)
- Weller ETF 1.2 mm Bevel 34.5 mm Soldering Iron Tip for use with LR20 LR21 (old generation)