SAM 1/2 in Drive 21 mm Impact Square, 210mm Overall Length
- N° de stock RS:
- 282-8757
- Référence fabricant:
- 76-BT8
- Fabricant:
- SAM
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 282-8757
- Référence fabricant:
- 76-BT8
- Fabricant:
- SAM
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SAM | |
| Socket Size | 21 mm | |
| Product Type | Socket | |
| Drive Size | 1/2 in | |
| Socket Type | Impact | |
| Number of Pieces | 1 | |
| Insulated | No | |
| VDE/1000V Approved | No | |
| Non-Sparking | No | |
| Overall Length | 210mm | |
| Standards/Approvals | NF ISO 691 | |
| Drive Type | Square | |
| Sélectionner tout | ||
|---|---|---|
Marque SAM | ||
Socket Size 21 mm | ||
Product Type Socket | ||
Drive Size 1/2 in | ||
Socket Type Impact | ||
Number of Pieces 1 | ||
Insulated No | ||
VDE/1000V Approved No | ||
Non-Sparking No | ||
Overall Length 210mm | ||
Standards/Approvals NF ISO 691 | ||
Drive Type Square | ||
Statut RoHS : Exempté
- Pays d'origine :
- FR
The SAM Torsion bar sockets Limits the torque generated by an impact wrench, to respect the tightening conditions. The socket is used for the approach when tightening and does not replace the torque wrench which alone certifies final tightening.
Compliance to NF ISO 691
Liens connexes
- SAM 1/2 in Drive 21 mm Impact Square, 214mm Overall Length
- SAM 1 in Drive 36 mm Impact Square, 36mm Overall Length
- SAM 1/2 in Drive 17 mm Impact Square, 214mm Overall Length
- SAM 21 mm Tubular Box Spanner, 210mm Overall
- SAM Tubular Box Spanner, 210mm Overall
- SAM 1/2 in Drive 21 mm 12 Point Square, 85mm Overall Length
- SAM 21 mm 12.7 mm Drive Impact Socket, 38 mm length
- SAM 21 mm 19.05 mm Drive Impact Socket, 51 mm length