Carroll & Meynell Site Transformer 1.65 kVA, 230 V ac Primary, 110 V ac Secondary, 15 A O/P
- N° de stock RS:
- 260-4367
- Référence fabricant:
- CM3300WM0
- Fabricant:
- Carroll & Meynell
Sous-total (1 unité)*
529,59 €
(TVA exclue)
640,80 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité |
|---|---|
| 1 + | 529,59 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 260-4367
- Référence fabricant:
- CM3300WM0
- Fabricant:
- Carroll & Meynell
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Carroll & Meynell | |
| Product Type | Site Transformer | |
| Primary Voltage | 230 V ac | |
| Secondary Voltage | 110 V ac | |
| Output Current | 15A | |
| Mount Type | Wall | |
| Series | CM3300WM0 | |
| Power | 1.65kVA | |
| Plug Type | Hard Wire L-N-E | |
| Standards/Approvals | No | |
| Weight | 18kg | |
| Depth | 255mm | |
| Width | 200 mm | |
| Length | 240mm | |
| Maximum Operating Frequency | 60Hz | |
| Minimum Operating Frequency | 50Hz | |
| Sélectionner tout | ||
|---|---|---|
Marque Carroll & Meynell | ||
Product Type Site Transformer | ||
Primary Voltage 230 V ac | ||
Secondary Voltage 110 V ac | ||
Output Current 15A | ||
Mount Type Wall | ||
Series CM3300WM0 | ||
Power 1.65kVA | ||
Plug Type Hard Wire L-N-E | ||
Standards/Approvals No | ||
Weight 18kg | ||
Depth 255mm | ||
Width 200 mm | ||
Length 240mm | ||
Maximum Operating Frequency 60Hz | ||
Minimum Operating Frequency 50Hz | ||
- Pays d'origine :
- GB
Single Phase, 230Vac Input, 110Vac Output Transformers
High quality wall mounting safety isolating transformers designed to ensure safe electrical distribution for power tools etc in industrial, garage and other fixed installations.
Double wound
110V secondaries centre tapped to earth to minimise shock risk
Sheet steel IP22 type wall mounting enclosure
Re settable thermal cut out trip in primary circuit to prevent overload
Thermal safety overload fuse embedded into primary winding
20mm conduit entry on both sides of case
Note
Tool rating is defined in BSEN 61558-2-23 as 5 minutes on and 15 minutes off. Maximum output must not exceed 16A per socket outlet.
Standards
BSEN 61558-2-23
Liens connexes
- Carroll & Meynell 1.65kVA Site Transformer ±110V ac Secondary, 15A O/P
- Carroll & Meynell Single Phase 1.65kVA Site Transformer ±55V ac Secondary
- Carroll & Meynell Single Phase 1.65kVA Site Transformer ±55V ac Secondary, 10A O/P
- Carroll & Meynell 750VA Site Transformer ±110V ac Secondary, 8.18A O/P
- Carroll & Meynell Single Phase 375VA Site Transformer 110V ac Secondary, 3A O/P
- Carroll & Meynell 3kVA Site Transformer 230V Secondary, 2 x 16A O/P
- Carroll & Meynell Single Phase 3kVA Site Transformer ±110V ac Secondary, 31.81A O/P
- Carroll & Meynell Splitter Box 110V ac Secondary, 16A O/P
