DFRobot DFR0418 Single Board Computer 2 GB

Voir la catégorie

Sous-total (1 unité)*

151,27 €

(TVA exclue)

183,04 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • Plus 4 unité(s) expédiée(s) à partir du 16 mars 2026
  • Plus 4 unité(s) expédiée(s) à partir du 16 mars 2026
  • Plus 485 unité(s) expédiée(s) à partir du 23 mars 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +151,27 €

*Prix donné à titre indicatif

N° de stock RS:
124-4684
Référence fabricant:
DFR0418
Fabricant:
DFRobot
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

DFRobot

Product Type

Single Board Computer

Memory Socket Type

eMMC

Interface Type

USB 2.0, WiFi, Bluetooth, Ethernet, HDMI, USB 3.0, MIPI-DSI

Minimum Supply Voltage

0V

Maximum Supply Voltage

5V

Number of Memory Sockets

1

Installed Memory

2GB

Core Processor

Intel Cherry Trail Z8350

Length

88mm

Height

70mm

Standards/Approvals

RoHS

Pays d'origine :
CN

LattePanda 2GB/32GB SBC


This is the LattePanda 2G/32G version from DFRobot, with the Intel Atom X5-Z8300 processor. It is a Windows 10 Single-Board Computer (SBC) capable of functioning as a full PC, plus plenty of software and hardware projects.

How to use LattePanda as a PC:

Simply add your keeyboard, mouse and HDMI or DVI-D input monitor. Alternatively, you can install Virtual Network Computing (VNC) software on the LattePanda and drive it remotely from another PC on the network. RS 124-4684 comes pre-installed with full Windows 10 Home Edition too.

What else can it do?

The LattePanda can also function as an embedded controller able to take inputs from sensors and drive motors and relays. For this purpose, a second processor chip is included: an ATmega32U4 which can be programmed as if it were an Arduino Leonardo. Most of the board's inputs and outputs are driven by this Arduino processor.

Versions Available:


(124-4684) - LattePanda with full Windows 10 License

(126-3118) - LattePanda without license

What’s on board?


Processor: Intel Atom X5-Z8300

Frequency: 1.8GHz

Operating System: Windows 10 Home Edition (124-4684)

Memory: 2GB DDR3L RAM & 32GB eMMC Flash

SD Card: micro SD card slot

GPU: Intel HD Graphics, 12 EUs @200-500Mhz, single-channel memory

USB: 1 x USB 3.0, 2 x USB 2.0

Power: microUSB connector

WiFi: 802.11n 2.4G

Bluetooth: Bluetooth 4.0

Co-processor: Arduino Leonardo ATmega32u4

Video: HDMI and MIPI-DSI

Ethernet: 100Mbps LAN connector

GPIO: 6 (Intel Processor), 20 (ATmega Processor)

Other Connectors: Gravity Interface Connectors x 6, Onboard touch panel

Voltage: 5V@2A

Dimensions: 88 x 70mm / 3.46 x 2.76"

How about some accessories?


126-3116 FIT0477 Colour 7in WSVGA LCD Display Panel;126-3115 FIT0506 Heatsink Kit;126-3113 FIT0504 Cooling Fan Kit;126-3114 KIT0112 Gravity Starter Sensor Module Kit

DFRobot


Note

When heavily loaded running a complex game program on all four cores, the LattePanda may overheat to the point where it has to protect itself by 'throttling back' the processor clock. This becomes obvious when fast moving graphics become slow and jerky. If this happens, then an additional heatsink kit or a fan is available (See above). These can be mounted on the perforated metal shield on the underside of the board. The fan is plugged into the CN2 header.

Supplied with

WiFi antenna

Liens connexes