2 Way Preci-Dip Right Angle Through Hole 2 mm Pitch SIL Socket, Solder, 3A
- N° de stock RS:
- 701-9483P
- Référence fabricant:
- 831-87-002-20-001101
- Fabricant:
- Preci-Dip
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 701-9483P
- Référence fabricant:
- 831-87-002-20-001101
- Fabricant:
- Preci-Dip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Preci-Dip | |
| Product Type | SIL Socket | |
| Number of Contacts | 2 | |
| Contact Material | Beryllium Copper Alloy, Brass | |
| Contact Plating | Gold, Tin | |
| Current | 3A | |
| Pitch | 2mm | |
| Orientation | Right Angle | |
| Mount Type | Through Hole | |
| Housing Material | Fibreglass Reinforced Liquid Crystal Polymer | |
| Termination Type | Solder | |
| Minimum Operating Temperature | -55°C | |
| Maximum Operating Temperature | 125°C | |
| Width | 2.8 mm | |
| Depth | 2.2mm | |
| Length | 4mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Preci-Dip | ||
Product Type SIL Socket | ||
Number of Contacts 2 | ||
Contact Material Beryllium Copper Alloy, Brass | ||
Contact Plating Gold, Tin | ||
Current 3A | ||
Pitch 2mm | ||
Orientation Right Angle | ||
Mount Type Through Hole | ||
Housing Material Fibreglass Reinforced Liquid Crystal Polymer | ||
Termination Type Solder | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature 125°C | ||
Width 2.8 mm | ||
Depth 2.2mm | ||
Length 4mm | ||
- Pays d'origine :
- CH
2 mm IC Sockets
These Swiss Preci-dip IC "Hard metric" PCB Socket Connector headers are solder tail Through Hole or SMD perpendicular Gull-Wing mount.
Sockets have Tin plated Brass sleeves with Flash Gold plated Beryllium Copper (4 finger) contact clips
The Through Hole headers have a Pin length of 3.2 mm
Suitable for Mating Pin Ø 0.4 → 0.66 mm or 0.5 mm square
Standards
UL 94V-0