Phoenix Contact MACX MCR Series Signal Conditioner, Voltage Input, Resistance, Voltage Output, 30V dc Supply, ATEX,
- N° de stock RS:
- 201-6290
- Référence fabricant:
- 2924126
- Fabricant:
- Phoenix Contact
Sous-total (1 unité)*
147,80 €
(TVA exclue)
178,84 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 19 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 147,80 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 201-6290
- Référence fabricant:
- 2924126
- Fabricant:
- Phoenix Contact
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Phoenix Contact | |
| Series | MACX MCR | |
| Product Type | Signal Conditioner | |
| Input Signal Type | Voltage | |
| Output Signal Type | Resistance, Voltage | |
| Supply Voltage | 30 V dc | |
| Hazardous Area Certification | ATEX, IECEx | |
| Input Range | 19.2 → 30 V dc | |
| IP Rating | IP20 | |
| Maximum Operating Temperature | 60 °C | |
| Minimum Operating Temperature | -40 °C | |
| Mount Type | DIN Rail | |
| Output Range | 275.7 Ω, 10.5 V dc | |
| Standards/Approvals | RoHS | |
| Sélectionner tout | ||
|---|---|---|
Marque Phoenix Contact | ||
Series MACX MCR | ||
Product Type Signal Conditioner | ||
Input Signal Type Voltage | ||
Output Signal Type Resistance, Voltage | ||
Supply Voltage 30 V dc | ||
Hazardous Area Certification ATEX, IECEx | ||
Input Range 19.2 → 30 V dc | ||
IP Rating IP20 | ||
Maximum Operating Temperature 60 °C | ||
Minimum Operating Temperature -40 °C | ||
Mount Type DIN Rail | ||
Output Range 275.7 Ω, 10.5 V dc | ||
Standards/Approvals RoHS | ||
- Pays d'origine :
- DE
The Phoenix Contact solenoid driver for the intrinsically safe control of Ex I solenoid valves with current limitation of 48mA and for gases up to group IIC is mechanically compatible with the DIN rail connector and is loop-powered where the required power is supplied via the control signal on the input side.
Various output characteristic curves compatible with standard solenoid valves
2-way electrical isolation
This article is apart of Phoenix Contact's entire 'Complete Line' range. Complete Line from Phoenix contact is a range designed to bring you the efficiency, ease of use and consistency to your control cabinet. Learn more at Complete Line Page.
Liens connexes
- Phoenix Contact MACX MCR Series Signal Conditioner Voltage IECEx/ATEX
- Phoenix Contact MACX MCR Series Signal Conditioner Voltage Output 9.6 V dc Supply, ATEX
- Phoenix Contact MACX MCR Series Signal Conditioner Current/Voltage Output ATEX
- Phoenix Contact MACX MCR Series Signal Conditioner 30V Supply IECEx
- Phoenix Contact MACX MCR Series Signal Conditioner Relay Output ATEX
- Phoenix Contact MACX MCR Series Signal Conditioner Transistor Output ATEX
- Phoenix Contact MACX MCR Series Signal Conditioner Current Output 8 V dc Supply, ATEX
- Phoenix Contact MACX MCR Series Signal Conditioner Thermocouple Input 24V dc Supply, ATEX