Ruland Shaft Collar, One Piece, Clamp Screw, OD 28 mm OD, W 11mm, Aluminium
- N° de stock RS:
- 174-7101
- Référence fabricant:
- OF-MCL-12-A
- Fabricant:
- Ruland
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
16,20 €
(TVA exclue)
19,60 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 1 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 16,20 € |
| 5 - 9 | 15,56 € |
| 10 - 24 | 15,22 € |
| 25 + | 14,89 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 174-7101
- Référence fabricant:
- OF-MCL-12-A
- Fabricant:
- Ruland
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Ruland | |
| Product Type | Shaft Collar | |
| Bore Diameter | 12mm | |
| One/Two Piece | One Piece | |
| Material | Aluminium | |
| Single/Double Wide | Single Wide | |
| Outside Diameter | 28mm | |
| Fastening | Clamp Screw | |
| Threaded Bore Size | M4 x 12 | |
| Width | 11mm | |
| Finish | Bright | |
| Bore Type | Plain | |
| Series | OF-MCL | |
| Standards/Approvals | REACH, RoHS3, DIN 912 12.9 | |
| Sélectionner tout | ||
|---|---|---|
Marque Ruland | ||
Product Type Shaft Collar | ||
Bore Diameter 12mm | ||
One/Two Piece One Piece | ||
Material Aluminium | ||
Single/Double Wide Single Wide | ||
Outside Diameter 28mm | ||
Fastening Clamp Screw | ||
Threaded Bore Size M4 x 12 | ||
Width 11mm | ||
Finish Bright | ||
Bore Type Plain | ||
Series OF-MCL | ||
Standards/Approvals REACH, RoHS3, DIN 912 12.9 | ||
- Pays d'origine :
- US
Ruland shaft collar one-piece clamp screw
The Ruland one-piece shaft collar has dimensions of 12mm bore, 28mm OD and 11mm width. It is made from aluminium. It has OD flats and tapped holes for mounting shaft collars to each other or the adjacent components. It can be used in applications requiring a more uniform holding power and higher axial load capacity than setscrew collars. It is easier to remove and reposition than setscrew collars and is effective on both, hard and soft shafts. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ 0.05mm) which is critical for the alignment. It is commonly used for guiding, spacing, stopping, mounting and component alignment.
Features and Benefits
• Includes forged socket-head cap screws for securing the collar onto the shaft
• Service temperatures ranges between -40°C and 107°C
Applications
• Agricultural implements
• Office machines
• Exercise equipment
• Mixers
• Printing press
Certifications
• DIN 912 12.9
• REACH certification
Liens connexes
- Ruland Shaft Collar Clamp W 11mm, Aluminium
- Ruland Shaft Collar Clamp Screw W 11mm, Stainless Steel
- Ruland Shaft Collar Clamp Screw W 11mm, Carbon Steel
- Ruland Shaft Collar Clamp W 11mm, 303 Stainless Steel
- Ruland Collar Clamp W 11mm, Steel
- Ruland Shaft Collar Clamp W 11mm, Steel
- Ruland Shaft Collar Clamp W 11mm, Plastic
- Ruland Shaft Collar Clamp Screw W 11mm, Aluminium