Ruland Shaft Collar, Two Piece, Clamp Screw, OD 45 mm OD, W 15mm, Carbon Steel
- N° de stock RS:
- 174-6774
- Référence fabricant:
- MSP-25-F
- Fabricant:
- Ruland
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
15,39 €
(TVA exclue)
18,62 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 72 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 15,39 € |
| 5 - 9 | 14,80 € |
| 10 - 24 | 14,47 € |
| 25 + | 14,16 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 174-6774
- Référence fabricant:
- MSP-25-F
- Fabricant:
- Ruland
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Ruland | |
| Product Type | Shaft Collar | |
| Bore Diameter | 25mm | |
| One/Two Piece | Two Piece | |
| Material | Carbon Steel | |
| Single/Double Wide | Double Wide | |
| Outside Diameter | 45mm | |
| Fastening | Clamp Screw | |
| Threaded Bore Size | M6 x 16 | |
| Width | 15mm | |
| Finish | Black Oxide | |
| Series | MSP | |
| Bore Type | Plain | |
| Standards/Approvals | REACH, RoHS3, DIN 912 12.9 | |
| Sélectionner tout | ||
|---|---|---|
Marque Ruland | ||
Product Type Shaft Collar | ||
Bore Diameter 25mm | ||
One/Two Piece Two Piece | ||
Material Carbon Steel | ||
Single/Double Wide Double Wide | ||
Outside Diameter 45mm | ||
Fastening Clamp Screw | ||
Threaded Bore Size M6 x 16 | ||
Width 15mm | ||
Finish Black Oxide | ||
Series MSP | ||
Bore Type Plain | ||
Standards/Approvals REACH, RoHS3, DIN 912 12.9 | ||
- Pays d'origine :
- US
Ruland MSP-25-F is a two-piece shaft collar with a 25mm bore, 45mm OD, and 15mm width. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. MSP-25-F is commonly used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity of Ruland shaft collars, TIR of ≤ 05mm. Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power.
Liens connexes
- Ruland Shaft Collar Clamp Screw W 15mm, Carbon Steel
- Ruland Shaft Collar Clamp Screw W 15mm, Carbon Steel
- Ruland Shaft Collar Clamp Screw W 15mm, Carbon Steel
- Ruland Shaft Collar Clamp Screw W 15mm, Carbon Steel
- Ruland Shaft Collar Clamp Screw W 15mm, Carbon Steel
- Ruland Shaft Collar Clamp Screw W 15mm, Carbon Steel
- Ruland Shaft Collar Clamp Screw W 15mm, Carbon Steel
- Ruland Shaft Collar Quick Clamp W 15mm, 1215 Carbon Steel