Ruland Shaft Collar, One Piece, Clamp Screw, OD 24 mm OD, W 9 mm, Carbon Steel
- N° de stock RS:
- 174-6730
- Référence fabricant:
- MCL-10-F
- Fabricant:
- Ruland
Offre groupée disponible
Sous-total (1 unité)*
6,27 €
(TVA exclue)
7,59 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 26 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 6,27 € |
| 5 - 9 | 6,02 € |
| 10 - 24 | 5,89 € |
| 25 + | 5,78 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 174-6730
- Référence fabricant:
- MCL-10-F
- Fabricant:
- Ruland
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Ruland | |
| Product Type | Shaft Collar | |
| Bore Size | 10 mm | |
| One/Two Piece | One Piece | |
| Material | Carbon Steel | |
| Single/Double Wide | Single Wide | |
| Outside Diameter | 24 mm | |
| Fastening | Clamp Screw | |
| Threaded Bore Size | M3 x 10 | |
| Width | 9 mm | |
| Finish | Black Oxide | |
| Standards/Approvals | DIN 912 12.9, REACH, RoHS3 | |
| Series | MCL | |
| Bore Type | Plain | |
| Sélectionner tout | ||
|---|---|---|
Marque Ruland | ||
Product Type Shaft Collar | ||
Bore Size 10 mm | ||
One/Two Piece One Piece | ||
Material Carbon Steel | ||
Single/Double Wide Single Wide | ||
Outside Diameter 24 mm | ||
Fastening Clamp Screw | ||
Threaded Bore Size M3 x 10 | ||
Width 9 mm | ||
Finish Black Oxide | ||
Standards/Approvals DIN 912 12.9, REACH, RoHS3 | ||
Series MCL | ||
Bore Type Plain | ||
- Pays d'origine :
- US
Ruland MCL-10-F is a one-piece shaft collar with a 10mm bore, 24mm OD, and 9mm width. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. It is commonly used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ .05mm). Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power. MCL-10-F is stamped with the Ruland name and bore size for ease of identification.
Liens connexes
- Ruland Shaft Collar Clamp W 19 mm, Carbon Steel
- Ruland Shaft Collar Clamp W 15 mm, Carbon Steel
- Ruland Shaft Collar Clamp W 15 mm, Carbon Steel
- Ruland Shaft Collar Clamp W 9 mm, Carbon Steel
- Ruland Shaft Collar Clamp W 9 mm, Carbon Steel
- Ruland Shaft Collar Clamp W 19 mm, Carbon Steel
- Ruland Shaft Collar Clamp W 13 mm, Carbon Steel
- Ruland Shaft Collar Clamp Screw W 15 mm, Carbon Steel