Ruland Shaft Collar, One Piece, Clamp, OD 40 mm OD, W 15 mm, 1215 Carbon Steel
- N° de stock RS:
- 628-021
- Référence fabricant:
- FHT-MCL-20-F
- Fabricant:
- Ruland
Sous-total (1 unité)*
26,47 €
(TVA exclue)
32,03 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 12 unité(s) expédiée(s) à partir du 04 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 26,47 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 628-021
- Référence fabricant:
- FHT-MCL-20-F
- Fabricant:
- Ruland
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Ruland | |
| Bore Size | 20 mm | |
| Product Type | Shaft Collar | |
| One/Two Piece | One Piece | |
| Material | 1215 Carbon Steel | |
| Single/Double Wide | Single Wide | |
| Outside Diameter | 40 mm | |
| Fastening | Clamp | |
| Threaded Bore Size | M6 | |
| Width | 15 mm | |
| Standards/Approvals | RoHs and Reach, DIN 91 1.9 | |
| Bore Type | Taper | |
| Series | FHT-MCL | |
| Sélectionner tout | ||
|---|---|---|
Marque Ruland | ||
Bore Size 20 mm | ||
Product Type Shaft Collar | ||
One/Two Piece One Piece | ||
Material 1215 Carbon Steel | ||
Single/Double Wide Single Wide | ||
Outside Diameter 40 mm | ||
Fastening Clamp | ||
Threaded Bore Size M6 | ||
Width 15 mm | ||
Standards/Approvals RoHs and Reach, DIN 91 1.9 | ||
Bore Type Taper | ||
Series FHT-MCL | ||
The Ruland Tapped holes for mounting shaft collars to sprockets, pulleys, metallic plates, or other components. Tapped holes allow for a secure connection between the shaft collar and mated component. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings.
Forged screws tested beyond DIN 912 12.9 standards for maximum holding power
Made from 1215 lead free steel
Proprietary black oxide finish with fine glossy appearance
Increased holding power and corrosion resistance
RoHS3 compliant
REACH compliant
Liens connexes
- Ruland Shaft Collar Clamp W 15 mm, 1215 Carbon Steel
- Ruland Shaft Collar Clamp W 13 mm, 1215 Carbon Steel
- Ruland Shaft Collar Clamp W 15 mm, 1215 Carbon Steel
- Ruland Shaft Collar Clamp W 15 mm, 1215 Carbon Steel
- Ruland Collar Clamp W 15 mm, 1215 Carbon Steel
- Ruland Collar Clamp Screw W 15 mm, 1215 Carbon Steel
- Ruland Collar Clamp Screw W 9 mm, 1215 Carbon Steel
- Ruland Collar Clamp Screw W 15 mm, 1215 Carbon Steel