M5Stack TVOC/eCO2 Gas Unit Gas Sensor Gas Sensor Board for SGP30 M5 Core, M5StickC, M5StickV
- N° de stock RS:
- 230-5144
- Numéro d'article Distrelec:
- 301-85-747
- Référence fabricant:
- U088
- Fabricant:
- M5Stack
Sous-total (1 unité)*
11,97 €
(TVA exclue)
14,48 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 22 unité(s) prête(s) à être expédiée(s)
- Plus 86 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 11,97 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 230-5144
- Numéro d'article Distrelec:
- 301-85-747
- Référence fabricant:
- U088
- Fabricant:
- M5Stack
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | M5Stack | |
| Sensor Technology | Gas Sensor | |
| Featured Device | SGP30 | |
| For Use With | M5 Core, M5StickC, M5StickV | |
| Kit Classification | Gas Sensor Board | |
| Kit Name | TVOC/eCO2 Gas Unit | |
| Sélectionner tout | ||
|---|---|---|
Marque M5Stack | ||
Sensor Technology Gas Sensor | ||
Featured Device SGP30 | ||
For Use With M5 Core, M5StickC, M5StickV | ||
Kit Classification Gas Sensor Board | ||
Kit Name TVOC/eCO2 Gas Unit | ||
- Pays d'origine :
- CN
The M5Stack TVOC/eCO2 mini Unit is a digital multi-pixel gas sensor unit with integrated SGP30. It mainly measures various VOC (volatile organic compounds) and H2 in the air. It can be programmed to detect TVOC (total volatile organic compounds) and eCO2 (equivalent carbon dioxide reading)Concentration measurement. Typical measurement accuracy is 15% within the measurement range, the SGP30 reading is internally calibrated and output, which can maintain long-term stability. SGP30 uses I2C protocol communication with on-chip humidity compensation function, which can be turned on through an external humidity sensor. If you need to obtain accurate results, you need to calibrate according to a known measurement source. SGP30 has a built-in calibration function. In addition, eCO2 is calculated based on the concentration of H2 and cannot completely replace "true" CO2 sensors for laboratory use.
TVOC/eCO2 concentration detection
I2C communication(0x58)
Outstanding long-term stability
Humidity Compensation
2x LEGO™ Hole
HY2.0 4P interface
I2C communication(0x58)
Outstanding long-term stability
Humidity Compensation
2x LEGO™ Hole
HY2.0 4P interface
Liens connexes
- Seeed Studio Grove-VOC and eCO2 Gas Sensor (SGP30) Gas Sensor for SGP30 Indoor Air Quality Application
- M5Stack Earth Moisture Unit Sensor Board M5 Core M5StickV
- M5Stack U097 for use with M5 Core M5StickV
- M5Stack U094 for use with M5 Core M5StickV
- M5Stack U119 for use with M5 Core M5StickV
- M5Stack U118 for use with M5 Core M5StickV
- M5Stack U102 for use with M5 Core M5StickV
- M5Stack U105 for use with M5 Core M5StickV