HARTING Female 3 way Straight to 3 way Unterminated Sensor Actuator Cable, 500 mm
- N° de stock RS:
- 877-4484
- Référence fabricant:
- 21043162301
- Fabricant:
- HARTING
Sous-total (1 unité)*
26,27 €
(TVA exclue)
31,79 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 42 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 26,27 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 877-4484
- Référence fabricant:
- 21043162301
- Fabricant:
- HARTING
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | HARTING | |
| Series | 2104 | |
| Product Type | Sensor Actuator Cable | |
| Jacket Material | Polyvinyl Chloride | |
| Cable Length | 500mm | |
| Number of Contacts A | 3 | |
| Connector Type A | Straight | |
| Connector Gender A | Female | |
| Connector Type B | Unterminated | |
| Number of Contacts B | 3 | |
| Voltage | 400V | |
| IP Rating | IP67 | |
| Standards/Approvals | IEC 61076-2-101, ISO/IEC 11 801, ISO/IEC 24 702, RoHS Compliant | |
| Sélectionner tout | ||
|---|---|---|
Marque HARTING | ||
Series 2104 | ||
Product Type Sensor Actuator Cable | ||
Jacket Material Polyvinyl Chloride | ||
Cable Length 500mm | ||
Number of Contacts A 3 | ||
Connector Type A Straight | ||
Connector Gender A Female | ||
Connector Type B Unterminated | ||
Number of Contacts B 3 | ||
Voltage 400V | ||
IP Rating IP67 | ||
Standards/Approvals IEC 61076-2-101, ISO/IEC 11 801, ISO/IEC 24 702, RoHS Compliant | ||
Harting 2104 Series Sensor Actuator Cable, 500mm Cable Length, 3 Contacts A - 21043162301
This sensor-actuator cable provides a sealed connection between sensing devices and control systems in industrial environments. It is designed for linking sensors or actuators to equipment where a protected, low-voltage Interface is required. The cable combines a female M8 connector with an open free end to permit straightforward integration into panels or Terminal blocks while remaining suitable for harsh conditions.
Features & Benefits
• Three-contact configuration delivers reliable signal and power distribution
• Polyvinyl chloride jacket offers abrasion and chemical resistance
• Rated to 400V for handling higher control voltages
• IP67 ingress protection enables use in wet or dusty locations
• Complies with IEC and ISO/IEC connector standards for interoperability
• Polyvinyl chloride jacket offers abrasion and chemical resistance
• Rated to 400V for handling higher control voltages
• IP67 ingress protection enables use in wet or dusty locations
• Complies with IEC and ISO/IEC connector standards for interoperability
**Applications**
• Suitable for machine automation sensor returns and actuator feeds
• Ideal for conveyor position sensing in dusty factories
• Used with distributed I/O nodes requiring sealed field wiring
• Can be used for robotic end-effector sensor connections
• Ideal for conveyor position sensing in dusty factories
• Used with distributed I/O nodes requiring sealed field wiring
• Can be used for robotic end-effector sensor connections
What connector type is provided for panel termination?
The cable terminates in a free end so conductors can be prepared for direct connection to screw terminals, crimp blocks or solder points.
How many conductors are present and how are they typically used?
There are three conductors, commonly they carry two signal/power lines Plus a common or earth depending on the sensor wiring scheme.
What standards ensure compatibility with third-party devices?
The connector geometry and pin layout conform to recognised IEC and ISO/IEC connector standards to match M8 interfaces across vendors.
Is the product suitable for contact with fluids on the factory floor?
The IP67 rating and PVC outer sheath provide protection against temporary immersion and exposure to liquids typical in industrial settings.
Standards
IEC 61076-2-101
Liens connexes
- HARTING Female 4 way Straight to Female 3 way Unterminated Sensor Actuator Cable, 500 mm
- HARTING Female 3 way M12 to Female 3 way Unterminated Sensor Actuator Cable, 500 mm
- HARTING Female 8 way M12 to Female 3 way Unterminated Sensor Actuator Cable, 500 mm
- HARTING Female 5 way M12 to Female 3 way Unterminated Sensor Actuator Cable, 500 mm
- HARTING Male 4 way Straight to 4 way Unterminated Sensor Actuator Cable, 500 mm
- Phoenix Contact Male 3 way Straight to Unterminated 3 way Unterminated Sensor Actuator Cable, 500 mm
- HARTING Female 12 way Straight to Female Unterminated Sensor Actuator Cable, 500 mm
- HARTING Female 3 way Straight to 3 way Unterminated Sensor Actuator Cable, 5 m