SICK Female 4 way M8, Straight to Male 4 way M12, Straight Connector Cable, 10 m
- N° de stock RS:
- 285-1476
- Référence fabricant:
- YF8U14-100UA3M2A14 / 2100804
- Fabricant:
- SICK
Sous-total (1 unité)*
29,78 €
(TVA exclue)
36,03 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 80,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 29 avril 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 29,78 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 285-1476
- Référence fabricant:
- YF8U14-100UA3M2A14 / 2100804
- Fabricant:
- SICK
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SICK | |
| Series | YF8U14 | |
| Product Type | Connector Cable | |
| Jacket Colour | Black | |
| Jacket Material | Polyurethane | |
| Cable Length | 10m | |
| Number of Contacts A | 4 | |
| Connector Gender A | Female | |
| Connector Type A | M8, Straight | |
| Connector Gender B | Male | |
| Connector Type B | M12, Straight | |
| Number of Contacts B | 4 | |
| Voltage | 2.5kV | |
| IP Rating | IP65, IP66K, IP67 | |
| Standards/Approvals | IEC 60332-1, UL 1581 FT2 | |
| Coding | A | |
| Sélectionner tout | ||
|---|---|---|
Marque SICK | ||
Series YF8U14 | ||
Product Type Connector Cable | ||
Jacket Colour Black | ||
Jacket Material Polyurethane | ||
Cable Length 10m | ||
Number of Contacts A 4 | ||
Connector Gender A Female | ||
Connector Type A M8, Straight | ||
Connector Gender B Male | ||
Connector Type B M12, Straight | ||
Number of Contacts B 4 | ||
Voltage 2.5kV | ||
IP Rating IP65, IP66K, IP67 | ||
Standards/Approvals IEC 60332-1, UL 1581 FT2 | ||
Coding A | ||
- Pays d'origine :
- CZ
Overview
The connection cables are equipped with a female connector at Head A featuring an M8, 4 pin, straight, A coded configuration, and a male connector at Head B with an M12, 4 pin, straight, A coded setup. The locking plug connector employs a screw connection mechanism. Both connectors are constructed from TPU material in black, with the locking nut made of zinc die cast, nickel plated material.
The seal material used is FKM, and the recommended tightening torque is 0.4 Nm for the M8 connector and 0.6 Nm for the M12 connector. The width across flats is 9 for the M8 connector and 13 for the M12 connector. The cable is 10 meters long, 4 wire, with a PUR (halogen free) jacket in black. The cable diameter is 4.5 mm, and the conductor cross section is 0.25 mm².
At a glance
-
Your Benefit
Applications
Zones with oils and lubricants
Drag chain operation
Robot