Lapp OLFLEX CLASSIC 110 CY Control Cable, 5 Cores, 1.5 mm² CSA 16 AWG, Screened, 100 m, Transparent Polyvinyl Chloride
- N° de stock RS:
- 280-5096
- Numéro d'article Distrelec:
- 301-10-612
- Référence fabricant:
- 1135305
- Fabricant:
- Lapp
Sous-total (1 bobine de 100 mètres)*
580,73 €
(TVA exclue)
702,68 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 11 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Bobine(s) | la bobine | le mètre* |
|---|---|---|
| 1 + | 580,73 € | 5,807 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 280-5096
- Numéro d'article Distrelec:
- 301-10-612
- Référence fabricant:
- 1135305
- Fabricant:
- Lapp
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Lapp | |
| Product Type | Control Cable | |
| Series | OLFLEX CLASSIC 110 CY | |
| Number of Cores | 5 | |
| Cross Sectional Area | 1.5 mm² | |
| Conductor Material | Copper | |
| Jacket Material | Polyvinyl Chloride | |
| Jacket Colour | Transparent | |
| Screened/Unscreened | Screened | |
| Cable Length | 100m | |
| Outside Diameter | 10.3mm | |
| Voltage | 4000V | |
| Conductor Type | Stranded | |
| Minimum Operating Temperature | -40°C | |
| Standards/Approvals | VDE-REG 7030, IEC 60228, EN 50525-2-51, EN 50363-3 | |
| Maximum Operating Temperature | 80°C | |
| Fire Behaviour | Flame Retardant acc. to IEC 60332-1-2 | |
| American Wire Gauge | 16AWG | |
| Core Strands | 5 | |
| Sélectionner tout | ||
|---|---|---|
Marque Lapp | ||
Product Type Control Cable | ||
Series OLFLEX CLASSIC 110 CY | ||
Number of Cores 5 | ||
Cross Sectional Area 1.5 mm² | ||
Conductor Material Copper | ||
Jacket Material Polyvinyl Chloride | ||
Jacket Colour Transparent | ||
Screened/Unscreened Screened | ||
Cable Length 100m | ||
Outside Diameter 10.3mm | ||
Voltage 4000V | ||
Conductor Type Stranded | ||
Minimum Operating Temperature -40°C | ||
Standards/Approvals VDE-REG 7030, IEC 60228, EN 50525-2-51, EN 50363-3 | ||
Maximum Operating Temperature 80°C | ||
Fire Behaviour Flame Retardant acc. to IEC 60332-1-2 | ||
American Wire Gauge 16AWG | ||
Core Strands 5 | ||
Statut RoHS : Exempté
- Pays d'origine :
- BG
The Lapp OLFLEX Classic 110 CY cables are VDE approved power and control cables for flexible use. Use and fixed installation for medium mechanical load conditions. They are also suitable for use in dry damp or wet areas. If using outdoors observe the indicated temperature range. These cables are limited suitable for free and continuously recurring movements. The maximum tensile load is 15 N/mm² of conductor cross-section during installation and operation. Compulsory guidance is not permitted.
Flame retardant
Silver Grey colour
Used in dry and damp and wet areas
Resistant to the effects of acids and alkalis and oils at room temperature
UV protection
Liens connexes
- Lapp OLFLEX CLASSIC 110 CY Control Cable 1.5 mm² CSA 16 AWG 100 m, Transparent Polyvinyl Chloride
- Lapp OLFLEX CLASSIC 110 CY Control Cable 1.5 mm² CSA 16 AWG 100 m, Transparent Polyvinyl Chloride
- Lapp OLFLEX CLASSIC 110 CY Control Cable 0.5 mm² CSA 20 AWG 100 m, Transparent Polyvinyl Chloride
- Lapp OLFLEX CLASSIC 110 CY Control Cable 0.5 mm² CSA 20 AWG 100 m, Transparent Polyvinyl Chloride
- Lapp OLFLEX CLASSIC 110 CY Control Cable 1.5 mm² CSA 16 AWG 50 m, Black Polyvinyl Chloride Sheath
- Lapp OLFLEX CLASSIC 115 CY Control Cable 0.5 mm² CSA 20 AWG 50 m, Silver Grey Polyvinyl Chloride
- Lapp OLFLEX CLASSIC 115 CY Control Cable 0.75 mm² CSA 18 AWG 50 m, Silver Grey Polyvinyl Chloride
- Lapp OLFLEX CLASSIC 115 CY Control Cable 0.75 mm² CSA 18 AWG 50 m, Silver Grey Polyvinyl Chloride