SKF Nitrile Rubber (NBR) Seal, 85 mm ID, 110 mm OD, 12 mm
- N° de stock RS:
- 267-3911
- Référence fabricant:
- 85X110X12 HMS5 RG
- Fabricant:
- SKF
Sous-total (1 paquet de 10 unités)*
41,49 €
(TVA exclue)
50,20 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 40 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 10 + | 4,149 € | 41,49 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 267-3911
- Référence fabricant:
- 85X110X12 HMS5 RG
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Seal | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 12mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Seal | ||
Seal Type Rotary Shaft Seal | ||
Thickness 12mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- Pays d'origine :
- CN
SKF Seal, 85mm Inside Diameter, 110mm Outside Diameter - 85X110X12 HMS5 RG
This is a radial rotary shaft seal designed to separate rotating and stationary components and retain lubricants in machines. It features a rubber outside diameter and a single elastomer sealing lip with a garter spring to maintain contact, making it suitable for moderate-speed rotating shafts operating across a wide temperature range.
Features & Benefits
• Nitrile lip material gives resistance to mineral oils and greases
• Garter spring maintains consistent radial load for sealing integrity
• Accommodates misalignment to reduce leakage risk under shaft runout
• Permissible circumferential speed 9.99 m/s enabling moderate-speed applications
• Operating temperature range −40°C to 100°C supporting varied environments
• Short-term temperature tolerance up to 120°C for occasional thermal excursions
• Garter spring maintains consistent radial load for sealing integrity
• Accommodates misalignment to reduce leakage risk under shaft runout
• Permissible circumferential speed 9.99 m/s enabling moderate-speed applications
• Operating temperature range −40°C to 100°C supporting varied environments
• Short-term temperature tolerance up to 120°C for occasional thermal excursions
**Applications**
• Suitable for gearbox lubricant retention in automation equipment
• Ideal for motor shafts in electrical drive systems
• Used with industrial actuators in mechanical assemblies
• Can be used for bearing protection in electronic cooling fans
• Used for sealing oil in rotating components of conveyors
• Ideal for motor shafts in electrical drive systems
• Used with industrial actuators in mechanical assemblies
• Can be used for bearing protection in electronic cooling fans
• Used for sealing oil in rotating components of conveyors
What maximum rotational speed can it handle?
It is rated for up to 2220 r/min under specified installation and operating conditions.
How does the seal cope with pressure differentials?
The seal tolerates a pressure differential of 0.03 N/mm when installed correctly in a housing bore and on a shaft with appropriate surface finish.
What outside diameter housing is required?
The design fits a housing bore of 110mm when the seal is pressed into place.
Are there associated spare parts for installation protection?
A thin-walled speedi-sleeve accessory is listed as an associated product for worn or damaged shafts.
Liens connexes
- SKF Nitrile Rubber (NBR) Seal 110 mm OD, 12 mm
- SKF Nitrile Rubber (NBR) Seal 110 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal 110 mm OD, 12 mm
- SKF Nitrile Rubber (NBR) Seal 140 mm OD, 12 mm
- SKF Nitrile Rubber (NBR) Seal 150 mm OD, 12 mm
- SKF Nitrile Rubber (NBR) Seal 130 mm OD, 12 mm
- SKF Nitrile Rubber (NBR) Seal 130 mm OD, 13 mm
- SKF Nitrile Rubber (NBR) Seal 110 mm OD, 10 mm