SKF Nitrile Rubber Seal, 65mm ID, 100mm OD, 10mm
- N° de stock RS:
- 267-3790
- Référence fabricant:
- 65X100X10 HMSA10 RG
- Fabricant:
- SKF
Sous-total (1 paquet de 10 unités)*
34,37 €
(TVA exclue)
41,59 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 100 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 30 unité(s) expédiée(s) à partir du 30 janvier 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 10 + | 3,437 € | 34,37 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 267-3790
- Référence fabricant:
- 65X100X10 HMSA10 RG
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Inside Diameter | 65mm | |
| Outside Diameter | 100mm | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 10mm | |
| Seal Material | Nitrile Rubber | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | +100°C | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Inside Diameter 65mm | ||
Outside Diameter 100mm | ||
Seal Type Rotary Shaft Seal | ||
Thickness 10mm | ||
Seal Material Nitrile Rubber | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature +100°C | ||
- Pays d'origine :
- CN
SKF Seal, Nitrile Rubber, 110mm Outside Diameter - 65X100X10 HMSA10 RG
This radial shaft seal by SKF is designed with a rubber outside diameter and a single sealing lip, ideal for use with oil or grease in various applications. It features a garter spring for optimal sealing against the shaft, even in polluted environments.
Features & Benefits
• High pumping rate for efficient operation
• Higher contamination exclusion with dust lip
• Garter spring included for improved sealing
• Ability to accommodate misalignment
• Enhanced performance with auxiliary lip
• Higher contamination exclusion with dust lip
• Garter spring included for improved sealing
• Ability to accommodate misalignment
• Enhanced performance with auxiliary lip
Applications
• Suitable for use in rotating and stationary machine components
• Ideal for sealing between components in relative motion
• Designed for applications requiring a radial shaft seal with robust sealing properties
• Ideal for sealing between components in relative motion
• Designed for applications requiring a radial shaft seal with robust sealing properties
Can it be used in applications with high circumferential speed?
Yes, this seal is designed to support a permissible circumferential speed of 8.9 m/s.
Will it withstand a wide range of operating temperatures?
The seal can operate in temperatures ranging from -40°C to 120°C for short periods.
Is this seal compliant with industry standards?
Yes, it complies with ISO 6194 and DIN 3760 standards for reliability and performance.
Can it be used in conjunction with SKF Speedi-Sleeve 99254?
Yes, it can be paired with SKF Speedi-Sleeve 99254 for enhanced sealing capabilities.
Does this seal offer protection against pressure differentials?
Yes, it can handle pressure differentials of 0.03 N/mm effectively.