SKF Nitrile Rubber (NBR) Radial Shaft Seal, 22 mm ID, 35 mm OD, 7 mm
- N° de stock RS:
- 267-3670
- Référence fabricant:
- 22X35X7 HMS5 RG
- Fabricant:
- SKF
Sous-total (10 unités, dans un pack de 10)*
12,96 €
(TVA exclue)
15,68 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 10 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 10 + | 1,296 € | 12,96 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 267-3670
- Référence fabricant:
- 22X35X7 HMS5 RG
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Radial Shaft Seal | |
| Inside Diameter | 22mm | |
| Outside Diameter | 35mm | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 7mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Radial Shaft Seal | ||
Inside Diameter 22mm | ||
Outside Diameter 35mm | ||
Seal Type Rotary Shaft Seal | ||
Thickness 7mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- Pays d'origine :
- CN
SKF Radial Shaft Seal, 22mm Inside Diameter, 35mm Outside Diameter - 22X35X7 HMS5 RG
This radial shaft seal provides rotary sealing for shafts operating in dynamic conditions. It is designed to maintain contact with a rotating shaft to prevent fluid leakage and exclude contaminants, suitable for assembly where resilient sealing against oils is required.
Features and Benefits:
• Made from nitrile rubber to resist common oil-based fluids
• Maintains sealing contact during shaft rotation for leakage control
• Thin cross-section reduces axial space requirements in housings
• Robust material performance for extended operational cycles
• Maintains sealing contact during shaft rotation for leakage control
• Thin cross-section reduces axial space requirements in housings
• Robust material performance for extended operational cycles
Applications
• Suitable for machines using a 22mm shaft diameter
• Used with rotating assemblies requiring oil containment
• Ideal for maintenance replacement in Compact housings
• Can be used for repair of transmission or gearbox shafts
• Used with rotating assemblies requiring oil containment
• Ideal for maintenance replacement in Compact housings
• Can be used for repair of transmission or gearbox shafts
What material characteristic makes it suitable for oil environments?
The seal is manufactured from nitrile rubber which has compatibility with oil-based lubricants and provides elastic sealing behaviour.
How does the seal accommodate installation into a housing?
The seal's outer diameter is sized to fit a matching bore, allowing interference fit retention within the housing.
What shaft size does the seal accept?
It is specified for use on a 22mm shaft, matching the internal sealing lip to that diameter.
How thick is the sealing section relative to axial space constraints?
The component has a thickness of 7mm, which limits axial intrusion into the assembly.
What external bore size should the housing provide for correct fit?
The housing bore should correspond to the seal's external diameter of 35mm for proper seating.
Liens connexes
- SKF Nitrile Rubber (NBR) Seal 35 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal 35 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal 47 mm OD, 6 mm
- SKF Nitrile Rubber (NBR) Seal 52 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal 72 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal 60 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal 62 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal 35 mm OD, 7 mm