SKF Nitrile Rubber (NBR) Seal, 19 mm ID, 32 mm OD, 7 mm
- N° de stock RS:
- 267-3606
- Référence fabricant:
- 19X32X7 HMSA10 RG
- Fabricant:
- SKF
Sous-total (1 paquet de 10 unités)*
10,58 €
(TVA exclue)
12,80 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 60 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 10 + | 1,058 € | 10,58 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 267-3606
- Référence fabricant:
- 19X32X7 HMSA10 RG
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Seal | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 7mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Seal | ||
Seal Type Rotary Shaft Seal | ||
Thickness 7mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- Pays d'origine :
- CN
SKF Seal, 19mm Inside Diameter, 32mm Outside Diameter - 19X32X7 HMSA10 RG
This seal is a radial rotary shaft seal designed to separate rotating and stationary components and retain lubricants in moving machinery. It features a rubber outer diameter and a single elastomeric sealing lip with an auxiliary non-contact lip and garter spring to maintain contact with the shaft in contaminated environments. The product is suitable for oil or grease sealing in machines operating at moderate temperatures and rotational speeds.
Features & Benefits
• Nitrile rubber lip provides chemical resistance for oil and grease
• Auxiliary non-contact lip improves exclusion of dust and debris
• Garter spring maintains consistent lip pressure during rotation
• Metal-reinforced rubber outside diameter eases housing installation
• Accepts shaft misalignment while maintaining sealing function
• Auxiliary non-contact lip improves exclusion of dust and debris
• Garter spring maintains consistent lip pressure during rotation
• Metal-reinforced rubber outside diameter eases housing installation
• Accepts shaft misalignment while maintaining sealing function
**Applications**
• Suitable for servo and stepper motor shafts in automation systems
• Ideal for gearbox and reducer oil retention in mechanical drives
• Used with rotating electromechanical assemblies in electronics manufacturing
• Can be used for rotating Seals in electrical motors and generators
• Used for maintenance replacement on bearing housings in machinery
• Ideal for gearbox and reducer oil retention in mechanical drives
• Used with rotating electromechanical assemblies in electronics manufacturing
• Can be used for rotating Seals in electrical motors and generators
• Used for maintenance replacement on bearing housings in machinery
What temperature range can it tolerate during continuous operation?
It operates continuously from −40°C up to 100°C with short-term peaks to 120°C.
How fast can the shaft rotate while maintaining sealing performance?
Circumferential speed may reach 3.92 m/s, corresponding to a maximum rotational speed of 3,960 r/min for the specified shaft diameter.
What housing condition is required for correct outer sealing?
A rubber outside diameter designed for a 32mm housing bore provides an interference fit when the housing accommodates a rubber metal-reinforced OD.
How does it perform under slight pressure differentials?
The design tolerates a pressure differential of 0.03 N/mm while preserving lubricant retention.
Which accessories are commonly paired for worn shafts?
A thin sleeve for shaft repair is typically used to restore a proper running surface before refitting the seal.
Liens connexes
- SKF Nitrile Rubber (NBR) Seal 30 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal 42 mm OD, 6 mm
- SKF Nitrile Rubber (NBR) Seal 30 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal 44 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal 47 mm OD, 6 mm
- SKF Nitrile Rubber (NBR) Seal 55 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal 55 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal 35 mm OD, 7 mm