SKF Nitrile Rubber (NBR) Seal, 35 mm ID, 72 mm OD, 10 mm

Voir l’ensemble des Seals

Sous-total (1 paquet de 10 unités)*

24,67 €

(TVA exclue)

29,85 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 180 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
le paquet*
10 +2,467 €24,67 €

*Prix donné à titre indicatif

N° de stock RS:
267-3500
Référence fabricant:
35X72X10 HMSA10 RG
Fabricant:
SKF
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

SKF

Product Type

Seal

Seal Type

Rotary Shaft Seal

Thickness

10mm

Seal Material

Nitrile Rubber (NBR)

Pays d'origine :
CN

SKF Seal, 35mm Inside Diameter, 72mm Outside Diameter - 35X72X10 HMSA10 RG


This seal is a rotary shaft seal designed to separate rotating and stationary machine elements, preventing lubricant escape and ingress of contaminants in dynamic assemblies. It features a rubber outer diameter with a single elastomeric sealing lip and an auxiliary non‑contacting lip, making it suitable for environments where oil or grease retention and contaminant exclusion are required.

Features & Benefits


• Garter spring ensures consistent radial load and improved lip contact
• Auxiliary non‑contacting lip enhances dust exclusion in polluted environments
• Nitrile rubber lip offers compatibility with oil and grease media
• Accommodates shaft misalignment to reduce sealing failures
• Permits circumferential speeds up to 6.39 m/s for rotational usage
• Withstands operating temperatures from −40°C to 100°C

Applications


• Suitable for sealing shafts in automation gearboxes and drives
• Ideal for rotating actuators in electrical equipment enclosures
• Used with bearings in mechanical transmission assemblies
• Can be used for oil retention in industrial motors and pumps

What shaft and housing sizes does it accept?


It is MADE for shafts of 35mm diameter and housings with a 72mm bore.

What are the limits for short‑term thermal exposure?


Short‑duration temperature excursions may reach 120°C without immediate failure.

How fast can the sealed shaft rotate safely?


The design supports rotational speeds up to 3,480 rpm under specified conditions.

Is it suitable where a pressure differential exists?


It can operate with a small pressure differential of around 0.03 N/mm.

What materials make up the outside diameter construction?


The outside diameter is rubber with metal reinforcement to provide a secure housing fit.

Liens connexes