SKF Nitrile Rubber (NBR) Seal, 35 mm ID, 52 mm OD, 7 mm
- N° de stock RS:
- 267-3476
- Référence fabricant:
- 35X52X7 HMS5 RG
- Fabricant:
- SKF
Sous-total (1 paquet de 10 unités)*
16,81 €
(TVA exclue)
20,34 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 140 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 10 + | 1,681 € | 16,81 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 267-3476
- Référence fabricant:
- 35X52X7 HMS5 RG
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Seal | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 7mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Seal | ||
Seal Type Rotary Shaft Seal | ||
Thickness 7mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- Pays d'origine :
- CN
SKF Seal, 35mm Inside Diameter, 52mm Outside Diameter - 35X52X7 HMS5 RG
This seal is a rotary shaft sealing component designed to separate rotating and stationary machine parts and retain lubricants in dynamic joints. It features an elastomeric sealing lip with a garter spring and a rubber outside diameter, intended for use with oil or grease in industrial rotating assemblies where controlled leakage and contamination exclusion are required.
Features & Benefits
• Permissible circumferential speed 6.4m/s improves operational throughput
• Operating temperature range −40°C to 100°C extends service life
• Short-term temperature tolerance up to 120°C permits thermal excursions
• Pressure differential 0.03N/mm helps maintain lubricant retention
• Garter spring maintains consistent radial load for sealing reliability
• Accommodates misalignment to reduce shaft wear and downtime
• Operating temperature range −40°C to 100°C extends service life
• Short-term temperature tolerance up to 120°C permits thermal excursions
• Pressure differential 0.03N/mm helps maintain lubricant retention
• Garter spring maintains consistent radial load for sealing reliability
• Accommodates misalignment to reduce shaft wear and downtime
**Applications**
• Suitable for automation drive shafts requiring oil retention
• Ideal for electrical motor shafts in industrial equipment
• Used with gearboxes that handle grease or oil lubrication
• Can be used for rotating assemblies in electronics manufacturing
• Used for maintenance replacement in mechanical drive systems
• Ideal for electrical motor shafts in industrial equipment
• Used with gearboxes that handle grease or oil lubrication
• Can be used for rotating assemblies in electronics manufacturing
• Used for maintenance replacement in mechanical drive systems
What materials compose the sealing lip and outer diameter?
The sealing lip is MADE from nitrile rubber (NBR) and the outside diameter is rubber with metal reinforcement to provide a flexible press-fit in the housing.
What rotational speed can it withstand in typical installations?
It is rated for up to 3 480r/min under the specified circumferential speed limit.
How does the design handle minor shaft misalignment?
The conventional lip geometry combined with the garter spring permits slight radial and angular deviations while maintaining contact and sealing performance.
Are there recommended associated parts for refurbishment?
A Speedi-Sleeve can be used to repair scored shafts before fitting the seal to restore correct running surfaces.
Liens connexes
- SKF Nitrile Rubber (NBR) Seal 52 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal 52 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal 52 mm OD, 10 mm
- SKF Rubber Metal Reinforced Rotary Shaft Seal 52 mm OD
- SKF Nitrile Rubber (NBR) Seal 68 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal 52 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal 52 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal 72 mm OD, 10 mm