SKF Nitrile Rubber (NBR) Seal, 32 mm ID, 47 mm OD, 7 mm
- N° de stock RS:
- 267-3422
- Référence fabricant:
- 32X47X7 HMSA10 RG
- Fabricant:
- SKF
Sous-total (1 paquet de 10 unités)*
15,73 €
(TVA exclue)
19,03 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 70 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 10 + | 1,573 € | 15,73 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 267-3422
- Référence fabricant:
- 32X47X7 HMSA10 RG
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Seal | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 7mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Seal | ||
Seal Type Rotary Shaft Seal | ||
Thickness 7mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- Pays d'origine :
- CN
SKF Seal, 32mm Inside Diameter, 47mm Outside Diameter - 32X47X7 HMSA10 RG
This seal provides a rotating-shaft barrier between moving and stationary components to retain lubricant and limit ingress of contaminants in mechanical assemblies. It uses an elastomer sealing lip with a rubber outer diameter to Interface with the housing and is intended for oil or grease service in industrial equipment.
Features & Benefits
• Nitrile rubber lip offers chemical compatibility with oils and greases
• Non-contacting auxiliary lip improves exclusion of dust and debris
• Garter spring maintains radial sealing force at varying temperatures
• Withstands circumferential speeds up to 6.03 m/s for rotating shafts
• Tolerates short-term temperatures to 120°C for intermittent operation
• Non-contacting auxiliary lip improves exclusion of dust and debris
• Garter spring maintains radial sealing force at varying temperatures
• Withstands circumferential speeds up to 6.03 m/s for rotating shafts
• Tolerates short-term temperatures to 120°C for intermittent operation
**Applications**
• Suitable for electric motor shaft sealing in automation systems
• Ideal for gearboxes requiring oil retention and contamination exclusion
• Used with rotating assemblies in electronics cooling fans
• Can be used for replacement in mechanical drives and reducers
• Ideal for gearboxes requiring oil retention and contamination exclusion
• Used with rotating assemblies in electronics cooling fans
• Can be used for replacement in mechanical drives and reducers
What shaft sizes can I fit this to?
It is designed to run on shafts sized to match a 32mm nominal diameter and engage a 47mm housing bore when installed.
What are the normal operating temperature limits?
Continuous service is suitable between −40°C to 100°C with brief exposure up to 120°C.
How does it manage misalignment between shaft and housing?
The elastomeric lip and rubber outside diameter allow some accommodation of shaft eccentricity and minor misalignment during operation.
Can it be used at high rotational speeds?
Yes, it is rated for rotational speeds up to 3,600 r/min, corresponding to the specified circumferential speed limit.
Liens connexes
- SKF Nitrile Rubber (NBR) Seal 47 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal 47 mm OD, 6 mm
- SKF Nitrile Rubber (NBR) Seal 47 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal 47 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal 47 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal 47 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal 47 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal 47 mm OD, 7 mm