SKF Polyurethane Seal, 47.5 mm ID, 63 mm OD, 6.3 mm
- N° de stock RS:
- 267-0495
- Référence fabricant:
- MPV-63X47.5X6.3
- Fabricant:
- SKF
Sous-total (1 paquet de 10 unités)*
87,06 €
(TVA exclue)
105,34 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 10 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 10 + | 8,706 € | 87,06 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 267-0495
- Référence fabricant:
- MPV-63X47.5X6.3
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Inside Diameter | 47.5mm | |
| Product Type | Seal | |
| Outside Diameter | 63mm | |
| Seal Type | Hydraulic Seal | |
| Thickness | 6.3mm | |
| Seal Material | Polyurethane | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Inside Diameter 47.5mm | ||
Product Type Seal | ||
Outside Diameter 63mm | ||
Seal Type Hydraulic Seal | ||
Thickness 6.3mm | ||
Seal Material Polyurethane | ||
Statut RoHS : Exempté
SKF Seal, 6.3mm Thickness, Polyurethane Seal - MPV-63X47.5X6.3
This seal is a hydraulic sealing component designed to contain fluid and prevent leakage within pressurised systems. It is manufactured from polyurethane and intended for use where a resilient elastomeric barrier is required between moving or stationary surfaces in hydraulic equipment.
Features and Benefits:
• Polyurethane construction provides high wear resistance for extended service life
• 6.3mm thickness offers robust compression stability under load
• Hydraulic sealing profile reduces fluid bypass during reciprocation
• Compatible with common hydraulic media for consistent performance
• 6.3mm thickness offers robust compression stability under load
• Hydraulic sealing profile reduces fluid bypass during reciprocation
• Compatible with common hydraulic media for consistent performance
Applications
• Suitable for rod sealing in hydraulic actuators
• Used with cylinder assemblies requiring resilient Seals
• Ideal for replacement of worn hydraulic Seals in maintenance
• Can be used for piston sealing where elastomeric contact is needed
• Used with cylinder assemblies requiring resilient Seals
• Ideal for replacement of worn hydraulic Seals in maintenance
• Can be used for piston sealing where elastomeric contact is needed
What material properties affect abrasion performance?
The polyurethane composition gives enhanced resistance to surface wear and maintains sealing contact under sliding motion.
How does thickness influence sealing behaviour?
The 6.3mm cross-section delivers dimensional stability and helps maintain sealing force under cyclical compression.
Which Interface dimensions determine fitment in a bore?
Fitment depends on the internal and external diameters which set radial clearance for installation.
How are inner and outer diameters used during installation?
The inner diameter locates on the shaft while the outer diameter engages the housing bore to form the seal.
Liens connexes
- SKF Polyamide Seal 63 mm OD, 6.3 mm
- SKF Polyurethane Seal 65 mm OD, 6.3 mm
- SKF Polyurethane Seal 75 mm OD, 6.3 mm
- SKF Polyurethane Seal 50 mm OD, 6.3 mm
- SKF Polyurethane Seal 55 mm OD, 6.3 mm
- SKF Polyurethane Seal 70 mm OD, 6.3 mm
- SKF Polyurethane Seal 60 mm OD, 6.3 mm
- SKF Polyurethane Seal 90 mm OD, 8.1 mm