SKF Polytetrafluoroethylene Seal, 74.5 mm ID, 90 mm OD, 6.3 mm
- N° de stock RS:
- 267-0438
- Référence fabricant:
- GH 90X74.5X6.3-AD1
- Fabricant:
- SKF
Sous-total (1 paquet de 5 unités)*
189,17 €
(TVA exclue)
228,90 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 5 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 5 + | 37,834 € | 189,17 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 267-0438
- Référence fabricant:
- GH 90X74.5X6.3-AD1
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Seal | |
| Inside Diameter | 74.5mm | |
| Outside Diameter | 90mm | |
| Seal Type | Hydraulic Seal | |
| Thickness | 6.3mm | |
| Seal Material | Polytetrafluoroethylene | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Seal | ||
Inside Diameter 74.5mm | ||
Outside Diameter 90mm | ||
Seal Type Hydraulic Seal | ||
Thickness 6.3mm | ||
Seal Material Polytetrafluoroethylene | ||
- Pays d'origine :
- CN
SKF Seal, 6.3mm Thickness, 74.5mm Inside Diameter - GH 90X74.5X6.3-AD1
This seal is a hydraulic sealing element manufactured from polytetrafluoroethylene for use in fluid power systems. It is intended to provide a low-friction barrier between moving components within hydraulic assemblies and maintain fluid containment under operating conditions.
Features and Benefits:
• Low-friction polymer reduces wear on mating surfaces
• Chemical-resistant material maintains performance in aggressive fluids
• Consistent cross-section supports stable dynamic sealing behaviour
• Durable construction extends service intervals in hydraulic circuits
• Chemical-resistant material maintains performance in aggressive fluids
• Consistent cross-section supports stable dynamic sealing behaviour
• Durable construction extends service intervals in hydraulic circuits
Applications
• Suitable for rod and piston sealing in hydraulic cylinders
• Used with reciprocating hydraulic actuators in industrial systems
• Ideal for refurbishment of hydraulic components in maintenance work
• Can be used for replacement Seals in mobile hydraulics
• Used with reciprocating hydraulic actuators in industrial systems
• Ideal for refurbishment of hydraulic components in maintenance work
• Can be used for replacement Seals in mobile hydraulics
What material properties affect compatibility with hydraulic fluids?
The component is moulded from polytetrafluoroethylene, which offers high chemical inertness and low wettability suitable for a wide range of hydraulic media.
How should the seal be referenced when selecting a replacement?
Match the inner and outer diameters and thickness specified to ensure correct fit within the gland and mating hardware.
What physical dimensions determine fitment in a cylinder gland?
The critical dimensions are the internal diameter, external diameter and radial thickness which set clearance and compression in the gland.
How does the seal’s thickness influence installation tolerances?
The 6.3 mm radial thickness dictates the compression allowance and influences the groove depth required for correct sealing performance.
Liens connexes
- SKF Polyamide Seal 90 mm OD, 6.3 mm
- SKF Polytetrafluoroethylene Seal 80 mm OD, 6.3 mm
- SKF Polytetrafluoroethylene Seal 50 mm OD, 4.2 mm
- SKF Polytetrafluoroethylene Seal 40 mm OD, 4.2 mm
- SKF Nitrile Rubber (NBR) Seal 100 mm OD, 6.3 mm
- SKF Nitrile Rubber (NBR) Seal 63 mm OD, 4.2 mm
- SKF Polyamide Seal 125 mm OD, 6.3 mm
- SKF Polyurethane Seal 65 mm OD, 6.3 mm