SKF Nitrile Rubber (NBR) Seal, 90 mm ID, 120 mm OD, 12 mm
- N° de stock RS:
- 267-0387
- Référence fabricant:
- 90X120X12 HMSA10 RG
- Fabricant:
- SKF
Sous-total (1 paquet de 5 unités)*
24,40 €
(TVA exclue)
29,50 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 5 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 5 + | 4,88 € | 24,40 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 267-0387
- Référence fabricant:
- 90X120X12 HMSA10 RG
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Seal | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 12mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Seal | ||
Seal Type Rotary Shaft Seal | ||
Thickness 12mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- Pays d'origine :
- CN
SKF Seal, 90mm Inside Diameter, 120mm Outside Diameter - 90X120X12 HMSA10 RG
This seal provides radial sealing for rotating shafts in industrial equipment, preventing lubricant loss and contaminant ingress in mechanical assemblies. It is intended for installations where a robust elastomer lip is required against a rotating journal and its surroundings.
Features & Benefits
• Rotary lip geometry ensures effective contact and reduced leakage
• 12mm section thickness adds structural rigidity under load
• Compatible with common shaft speeds in automation systems
• Withstands routine mechanical wear for predictable maintenance intervals
• 12mm section thickness adds structural rigidity under load
• Compatible with common shaft speeds in automation systems
• Withstands routine mechanical wear for predictable maintenance intervals
**Applications**
• Suitable for sealing drive shafts in conveyor and actuator systems
• Ideal for use in motor housings within electrical equipment
• Used with gearboxes in mechanical power-transmission assemblies
• Can be used for rotating interfaces in robotic and automation units
• Ideal for use in motor housings within electrical equipment
• Used with gearboxes in mechanical power-transmission assemblies
• Can be used for rotating interfaces in robotic and automation units
What material behaviour should be expected in oily environments?
The nitrile compound offers good resistance to mineral oils and typical lubricants, maintaining elasticity and sealing capability under continuous oil exposure.
How does the seal cope with routine mechanical wear?
The design balances a Durable elastomer lip with sufficient thickness to tolerate abrasive particles and maintain sealing contact over repeated shaft rotations.
Can it be integrated into existing shaft assemblies without modification?
It is intended to fit standard shaft housings with matching bore and journal sizes, enabling retrofit installations where compatible clearances are present.
What operational advantage does the construction provide for industrial use?
The combination of a resilient seal lip and a robust cross-section delivers stable sealing pressure and predictable service intervals in industrial motion systems.
Liens connexes
- SKF Nitrile Rubber (NBR) Seal 120 mm OD, 12 mm
- SKF Nitrile Rubber (NBR) Seal 120 mm OD, 12 mm
- SKF Nitrile Rubber (NBR) Seal 120 mm OD, 12 mm
- SKF Nitrile Rubber (NBR) Seal 140 mm OD, 13 mm
- SKF Nitrile Rubber (NBR) Seal 150 mm OD, 12 mm
- SKF Nitrile Rubber (NBR) Seal 140 mm OD, 12 mm
- SKF Nitrile Rubber (NBR) Seal 160 mm OD, 12 mm
- SKF Nitrile Rubber (NBR) Seal 180 mm OD, 15 mm