SKF Nitrile Rubber (NBR) Seal, 50 mm ID, 65 mm OD, 10 mm
- N° de stock RS:
- 267-0306
- Référence fabricant:
- 50X65X10 HMSA10 RG
- Fabricant:
- SKF
Sous-total (1 paquet de 10 unités)*
19,52 €
(TVA exclue)
23,62 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 50 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 70 unité(s) expédiée(s) à partir du 15 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 10 + | 1,952 € | 19,52 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 267-0306
- Référence fabricant:
- 50X65X10 HMSA10 RG
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Seal | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 10mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Seal | ||
Seal Type Rotary Shaft Seal | ||
Thickness 10mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- Pays d'origine :
- CN
SKF Seal, 50mm Inside Diameter, 65mm Outside Diameter - 50X65X10 HMSA10 RG
This radial shaft seal provides a rotating-shaft barrier to retain lubricants and exclude contaminants in equipment where a shaft passes through a stationary housing. It is intended for oil or grease service and features a rubber outer diameter and a conventional elastomer sealing lip combined with an auxiliary non‑contacting lip and garter spring to maintain contact under varied conditions.
Features & Benefits
• Auxiliary non‑contacting lip improves contamination exclusion
• Garter spring maintains lip‑to‑shaft contact at speed
• Permits operation up to 7.84 m/s circumferential speed
• Withstands temperatures from −40°C to 100°C
• Tolerates short‑term peaks up to 120°C
• Accommodates shaft misalignment during rotation
• Garter spring maintains lip‑to‑shaft contact at speed
• Permits operation up to 7.84 m/s circumferential speed
• Withstands temperatures from −40°C to 100°C
• Tolerates short‑term peaks up to 120°C
• Accommodates shaft misalignment during rotation
**Applications**
• Suitable for bearings in automation equipment
• Ideal for rotating assemblies in electrical motor drives
• Used with gearboxes requiring oil‑retaining Seals
• Can be used for rotating shafts in robotics systems
• Used for maintenance replacement in mechanical plants
• Ideal for rotating assemblies in electrical motor drives
• Used with gearboxes requiring oil‑retaining Seals
• Can be used for rotating shafts in robotics systems
• Used for maintenance replacement in mechanical plants
What shaft sizes does it fit?
It is designed to run on a 50mm shaft and locates in a 65mm housing bore.
What is the maximum permissible rotational speed?
The seal supports up to 3000 r/min under the stated circumferential speed limit.
How does it handle pressure differences?
It is rated for a differential of 0.03 N/mm, suitable for low‑pressure retention applications.
What material composes the sealing lip and what are the benefits?
The lip is MADE from nitrile rubber (NBR), offering chemical resistance appropriate for oil and grease duties.
Are specialised installation aids recommended?
Use an appropriate sleeve or installation tool to protect the sealing lip and ensure correct seating in the rubber outside diameter.
Liens connexes
- SKF Nitrile Rubber (NBR) Seal 65 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal 65 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal 65 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal 65 mm OD, 12 mm
- SKF Nitrile Rubber (NBR) Seal 65 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal 65 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal 65 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal 65 mm OD, 10 mm