SKF Flouro Rubber Seal, 45 mm ID, 48 mm OD, 13 mm
- N° de stock RS:
- 267-0297
- Référence fabricant:
- 50 VS V
- Fabricant:
- SKF
Sous-total (1 unité)*
21,13 €
(TVA exclue)
25,57 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 5 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 21,13 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 267-0297
- Référence fabricant:
- 50 VS V
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Seal | |
| Inside Diameter | 45mm | |
| Outside Diameter | 48mm | |
| Seal Type | V Seal | |
| Thickness | 13mm | |
| Seal Material | Flouro Rubber | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Seal | ||
Inside Diameter 45mm | ||
Outside Diameter 48mm | ||
Seal Type V Seal | ||
Thickness 13mm | ||
Seal Material Flouro Rubber | ||
- Pays d'origine :
- IT
SKF Seal, 13mm Thickness, 45mm Inside Diameter - 50 VS V
This seal is a V-shaped sealing element designed for dynamic shaft applications, providing fluid containment and exclusion in rotating assemblies. It is manufactured from a fluorine-based elastomer to perform in settings requiring resistance to aggressive media and elevated temperatures, and is intended to fit tightly within a V-groove profile for axial sealing.
Features and Benefits:
• Fluoro-rubber construction gives enhanced chemical resistance
• V-profile form reduces axial leakage in rotating shafts
• Designed for high-temperature service where heat tolerance is required
• Compressible lip geometry supports sustained sealing contact
• Low-friction material aids reduced wear during rotation
• V-profile form reduces axial leakage in rotating shafts
• Designed for high-temperature service where heat tolerance is required
• Compressible lip geometry supports sustained sealing contact
• Low-friction material aids reduced wear during rotation
Applications
• Suitable for sealing shafts in hydraulic equipment
• Ideal for use in pumps handling aggressive fluids
• Used with rotary shafts exposed to high temperatures
• Can be used for retrofitting V-groove seal assemblies
• Suitable for industrial machinery requiring chemical resistance
• Ideal for use in pumps handling aggressive fluids
• Used with rotary shafts exposed to high temperatures
• Can be used for retrofitting V-groove seal assemblies
• Suitable for industrial machinery requiring chemical resistance
What are the key material characteristics relevant to aggressive media?
The component is MADE from a fluorine-containing elastomer selected for resistance to a wide range of chemicals and fuels.
How does the seal manage heat during continuous operation?
The elastomer formulation is intended to withstand elevated service temperatures, maintaining elasticity and sealing contact under thermal stress.
What design aspect minimises leakage on rotating shafts?
The V-shaped cross-section allows axial lip engagement that compensates for shaft movement and maintains a fluid-tight interface.
How should the sealing element be positioned in the shaft assembly?
It should be installed into a matching V-groove so the lips compress against the shaft to form the sealing interface.
What operational behaviour affects wear rate?
Friction between the seal lips and the rotating surface determines wear, so lubrication and shaft finish will influence service life.
Liens connexes
- SKF Flouro Rubber Seal 43 mm OD, 13 mm
- SKF Flouro Rubber Seal 38 mm OD, 13 mm
- SKF Flouro Rubber Seal 58 mm OD, 13 mm
- SKF Nitrile Rubber (NBR) Seal 48 mm OD, 13 mm
- SKF Flouro Rubber Seal 105 mm OD, 18 mm
- SKF Flouro Rubber Seal 117 mm OD, 18 mm
- SKF Flouro Rubber Seal 88 mm OD, 15.5 mm
- SKF Flouro Rubber Seal 19 mm OD, 10.5 mm