SKF Nitrile Rubber (NBR) Radial Shaft Seal, 45 mm ID, 72 mm OD, 8 mm
- N° de stock RS:
- 267-0260
- Référence fabricant:
- 45X72X8 HMS5 RG
- Fabricant:
- SKF
Sous-total (1 paquet de 10 unités)*
29,98 €
(TVA exclue)
36,28 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 20 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 10 + | 2,998 € | 29,98 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 267-0260
- Référence fabricant:
- 45X72X8 HMS5 RG
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Radial Shaft Seal | |
| Inside Diameter | 45mm | |
| Outside Diameter | 72mm | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 8mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Radial Shaft Seal | ||
Inside Diameter 45mm | ||
Outside Diameter 72mm | ||
Seal Type Rotary Shaft Seal | ||
Thickness 8mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- Pays d'origine :
- CN
SKF Radial Shaft Seal, 45mm Inside Diameter, 72mm Outside Diameter - 45X72X8 HMS5 RG
This radial shaft seal provides a sealing solution for rotating shafts, preventing lubricant leakage and excluding contaminants in rotary assemblies. It is manufactured from nitrile rubber and is intended for use where a resilient elastomer contact seal is required around a moving shaft.
Features and Benefits:
• Nitrile rubber compound resists common oils and greases
• Rotary design maintains continuous contact during shaft movement
• Sealing lip geometry minimises fluid escape under rotation
• Robust 8mm thickness improves longevity under axial load
• Compatible with moderate temperature and chemical exposure
• Rotary design maintains continuous contact during shaft movement
• Sealing lip geometry minimises fluid escape under rotation
• Robust 8mm thickness improves longevity under axial load
• Compatible with moderate temperature and chemical exposure
Applications
• Suitable for bearings in industrial gearboxes
• Used with motor shafts in general machinery
• Ideal for pump shaft sealing duties
• Can be used for transmission component sealing
• Appropriate for rotating assemblies in factory equipment
• Used with motor shafts in general machinery
• Ideal for pump shaft sealing duties
• Can be used for transmission component sealing
• Appropriate for rotating assemblies in factory equipment
What internal dimension should the shaft diameter match?
The seal is specified for a 45mm inside diameter and should fit shafts sized accordingly.
What external housing bore is required for correct installation?
The outer diameter is 72mm so the receiving bore must accommodate that outside dimension for proper seating.
How thick is the sealing element and what does that imply?
The body thickness is 8mm which provides a substantial cross-section for pressure resistance and handling installation stresses.
Which material is used and why is it chosen for rotary seals?
The material is nitrile rubber, selected for its compatibility with oils and common lubricants.
Is this product suited to dynamic rotary sealing applications?
Yes, the component is a rotary shaft seal designed to operate while the shaft is turning.
Liens connexes
- SKF Nitrile Rubber (NBR) Seal 72 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal 72 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal 72 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal 72 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal 72 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal 72 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal 72 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal 72 mm OD, 8 mm