SKF Nitrile Rubber (NBR) Seal, 40 mm ID, 68 mm OD, 10 mm

Voir l’ensemble des Seals

Sous-total (1 paquet de 10 unités)*

20,94 €

(TVA exclue)

25,34 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 20 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
le paquet*
10 +2,094 €20,94 €

*Prix donné à titre indicatif

N° de stock RS:
266-9154
Référence fabricant:
40X68X10 HMSA10 RG
Fabricant:
SKF
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

SKF

Product Type

Seal

Seal Type

Rotary Shaft Seal

Thickness

10mm

Seal Material

Nitrile Rubber (NBR)

Pays d'origine :
CN

SKF Seal, 40mm Inside Diameter, 68mm Outside Diameter - 40X68X10 HMSA10 RG


This seal provides a radial sealing solution for interfaces between rotating and stationary components in industrial equipment. It features a rubber outer casing and a single elastomer lip designed to retain oil or grease while excluding contaminants, with a garter spring and an auxiliary non‑contact lip to maintain sealing performance in dusty environments.

Features & Benefits


• Designed for high circumferential speed up to 6.93 m/s to support fast shafts
• Operates across −40°C to 100°C continuous temperature range
• Withstands short temperature peaks to 120°C for transient conditions
• Auxiliary lip and dust lip enhance contamination exclusion during operation
• Garter spring ensures consistent radial contact for reliable sealing
• Accommodates shaft misalignment to reduce installation sensitivity

Applications


• Suitable for bearings in automation actuators and drives
• Ideal for motor shafts in electrical equipment
• Used with gearboxes requiring oil retention and dust exclusion
• Can be used for rotating assemblies in electronics manufacturing machinery

What shaft sizes does it accept?


It is intended for a shaft diameter of 40mm and is manufactured to fit corresponding housings.

How fast can the sealed shaft rotate?


The maximum permissible rotational speed is 3,300 r/min under the specified operating conditions.

What pressure differential can the seal tolerate?


The seal is rated for a pressure differential of 0.03 N/mm² in its intended applications.

Which sealing material contacts the shaft?


The sealing lip is MADE from nitrile rubber (NBR), providing oil and grease compatibility with common industrial lubricants.

Liens connexes