SKF Nitrile Rubber Seal, 40mm ID, 58mm OD, 8mm
- N° de stock RS:
- 266-9135
- Référence fabricant:
- 40X58X8 HMSA10 RG
- Fabricant:
- SKF
Sous-total (1 paquet de 10 unités)*
17,18 €
(TVA exclue)
20,79 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 20 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 10 + | 1,718 € | 17,18 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 266-9135
- Référence fabricant:
- 40X58X8 HMSA10 RG
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Inside Diameter | 40mm | |
| Outside Diameter | 58mm | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 8mm | |
| Seal Material | Nitrile Rubber | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | +100°C | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Inside Diameter 40mm | ||
Outside Diameter 58mm | ||
Seal Type Rotary Shaft Seal | ||
Thickness 8mm | ||
Seal Material Nitrile Rubber | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature +100°C | ||
- Pays d'origine :
- CN
SKF Seal, 40mm Inside Diameter, 58mm Outside Diameter - 40X58X8 HMSA10 RG
This seal is a rotary shaft seal designed for industrial applications. Optimised for both oil and grease, it features a robust rubber outside diameter and a single sealing lip made from nitrile rubber. With an inside diameter of 40mm and an outside diameter of 58mm, this seal ensures effective performance across a range of operating conditions. It can function within temperatures from -40 to +100 °C, accommodating various mechanical sealing solutions.
Features & Benefits
• Garter spring enhances sealing efficiency for rotating shafts
• Non-contacting auxiliary lip improves contamination exclusion
• Designed to cope with misalignment for better performance
• High pumping rate maximises fluid retention and reduces leakage
• Constructed from nitrile rubber, suitable for harsh environments
• Compatible with dynamic requirements requiring robust sealing solutions
• Non-contacting auxiliary lip improves contamination exclusion
• Designed to cope with misalignment for better performance
• High pumping rate maximises fluid retention and reduces leakage
• Constructed from nitrile rubber, suitable for harsh environments
• Compatible with dynamic requirements requiring robust sealing solutions
Applications
• Used for sealing between rotating and stationary components
• Ideal for environments subject to contamination from dust and debris
• Suitable for machinery in the electrical and mechanical sectors
• Recommended for lubrication in automation systems
• Ideal for environments subject to contamination from dust and debris
• Suitable for machinery in the electrical and mechanical sectors
• Recommended for lubrication in automation systems
What temperature ranges can be managed effectively with this seal?
The design allows for operation between -40 to +100 °C, making it suitable for both low-temperature and high-temperature environments, with short periods reaching up to 120°C.
How does the inclusion of a garter spring benefit the sealing process?
The garter spring maintains consistent contact between the sealing lip and shaft, reducing the possibility of leakage and enhancing the overall performance of the seal under dynamic conditions.
In what scenarios might the non-contacting auxiliary lip be advantageous?
The non-contacting auxiliary lip reduces wear and friction against the shaft, making it especially useful in applications where contaminants are present, thus prolonging the lifespan of the seal.