SKF Nitrile Rubber (NBR) Radial Shaft Seal, 16 mm ID, 30 mm OD, 7 mm
- N° de stock RS:
- 266-8966
- Référence fabricant:
- 16X30X7 HMS5 RG
- Fabricant:
- SKF
Sous-total (10 unités, dans un pack de 10)*
11,06 €
(TVA exclue)
13,38 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 20 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 10 + | 1,106 € | 11,06 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 266-8966
- Référence fabricant:
- 16X30X7 HMS5 RG
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Radial Shaft Seal | |
| Inside Diameter | 16mm | |
| Outside Diameter | 30mm | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 7mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Radial Shaft Seal | ||
Inside Diameter 16mm | ||
Outside Diameter 30mm | ||
Seal Type Rotary Shaft Seal | ||
Thickness 7mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- Pays d'origine :
- CN
SKF Radial Shaft Seal, 16mm Inside Diameter, 30mm Outside Diameter - 16X30X7 HMS5 RG
This radial shaft seal provides a sealing solution for rotary shafts, designed to prevent fluid leakage and exclude contaminants in rotating assemblies. It is manufactured from nitrile rubber (NBR) and suited to applications where a resilient elastomeric lip is required to maintain a barrier between shaft and housing during rotation.
Features and Benefits:
• Nitrile rubber composition resists common oils and greases
• Designed for rotary motion to maintain dynamic sealing contact
• Narrow cross-section reduces radial space requirement
• Robust lip geometry supports sustained rotational friction control
• Designed for rotary motion to maintain dynamic sealing contact
• Narrow cross-section reduces radial space requirement
• Robust lip geometry supports sustained rotational friction control
Applications
• Suitable for small gearbox output shafts
• Used with motor drives requiring oil retention
• Ideal for pump shaft sealing in Compact housings
• Can be used for bearing chamber contamination control
• Used with motor drives requiring oil retention
• Ideal for pump shaft sealing in Compact housings
• Can be used for bearing chamber contamination control
What internal clearance is required for proper installation?
A smooth shaft bore matching the specified inside diameter ensures even sealing contact and minimises leakage.
How does the material affect compatibility with lubricants?
The elastomer formulation provides general resistance to petroleum-based oils and common greases while maintaining flexibility at the sealing lip.
What housing bore condition is recommended for long service life?
A properly machined housing bore with correct concentricity to the shaft and minimal surface damage supports consistent sealing performance.
How should the seal be oriented during assembly?
The sealing lip must face the fluid or contaminant source so the dynamic lip contacts the shaft in operation.
Liens connexes
- SKF Nitrile Rubber (NBR) Seal 30 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal 28 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal 55 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal 42 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal 62 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal 60 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal 32 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal 30 mm OD, 7 mm
