SKF Metal-Cased with Sealant Coated Rotary Shaft Seal, 55.575 mm ID, 85.09 mm OD
- N° de stock RS:
- 588-322
- Référence fabricant:
- 21890
- Fabricant:
- SKF
Sous-total (1 paquet de 5 unités)*
102,18 €
(TVA exclue)
123,64 €
(TVA incluse)
Ajouter 1 paquet pour bénéficier d'une livraison gratuite
Temporairement en rupture de stock
- Expédition à partir du 26 mars 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Paquet(s) | le paquet | Prix par unité* |
|---|---|---|
| 1 + | 102,18 € | 20,436 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 588-322
- Référence fabricant:
- 21890
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Rotary Shaft Seal | |
| Material | Metal-Cased with Sealant Coated | |
| Inside Diameter | 55.575 mm | |
| Outside Diameter | 85.09 mm | |
| Minimum Operating Temperature | -40°C | |
| Thickness | 11.13mm | |
| Maximum Operating Temperature | 100°C | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Rotary Shaft Seal | ||
Material Metal-Cased with Sealant Coated | ||
Inside Diameter 55.575 mm | ||
Outside Diameter 85.09 mm | ||
Minimum Operating Temperature -40°C | ||
Thickness 11.13mm | ||
Maximum Operating Temperature 100°C | ||
Standards/Approvals No | ||
- Pays d'origine :
- MX
The SKF Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
For oil or grease
With garter spring
WAVE lip creates higher pumping rate
WAVE lip has less friction between shaft and lip
WAVE lip has a lower temperature at the contact point