Hirose, DX 36 Way Male Straight Cable SCSI Connector 1.27 mm Pitch, Solder
- N° de stock RS:
- 162-5745
- Référence fabricant:
- DX40-36P(55)
- Fabricant:
- Hirose
Actuellement indisponible
Désolés, nous ne savons pas quand ce produit sera réapprovisionné.
- N° de stock RS:
- 162-5745
- Référence fabricant:
- DX40-36P(55)
- Fabricant:
- Hirose
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Hirose | |
| Product Type | SCSI Connector | |
| Number of Contacts | 36 | |
| Current | 500mA | |
| Orientation | Straight | |
| Mount Type | Cable | |
| Contact Material | Copper Alloy | |
| Connector Gender | Male | |
| Contact Plating | Gold | |
| Housing Material | Zinc Alloy | |
| Pitch | 1.27mm | |
| Voltage | 300V ac | |
| Minimum Operating Temperature | -55°C | |
| Termination Type | Solder | |
| Contact Gender | Male | |
| Maximum Operating Temperature | 85°C | |
| Series | DX | |
| Standards/Approvals | RoHS | |
| Sélectionner tout | ||
|---|---|---|
Marque Hirose | ||
Product Type SCSI Connector | ||
Number of Contacts 36 | ||
Current 500mA | ||
Orientation Straight | ||
Mount Type Cable | ||
Contact Material Copper Alloy | ||
Connector Gender Male | ||
Contact Plating Gold | ||
Housing Material Zinc Alloy | ||
Pitch 1.27mm | ||
Voltage 300V ac | ||
Minimum Operating Temperature -55°C | ||
Termination Type Solder | ||
Contact Gender Male | ||
Maximum Operating Temperature 85°C | ||
Series DX | ||
Standards/Approvals RoHS | ||
- Pays d'origine :
- JP
Hirose original 1.27mm pitch High-Density I/O connectors
1.27mm (0.050'') contact spacing conserves valuable board space and permits ultra-high density designs.
Bellow contacts create smooth and precise mating and unmating.
Unique shell design assures first make/mast break grounding and overall noise protection.
IDC termination allows quick and low cost termination to AWG #28 and #30 wires.
Back Shell and receptacle shell are made of diecast zinc alloy to reduce the penetration of external EMI noise.
Easy to use 'One-Touch' and 'Screw' locking mechanisms assure quick and easy 'positive' closures every time.
Termination method is available in IDC, Soldering, Right Angle Dip, Straight Dip and SMT.
DX with 3 cavities and 2 cavities for Co-axial contacts are newly introduced to meet the needs of high speed data transmission.
Shielded Plug-in type for interface between 2 Units available.