Infineon 70 V 70 mA Rectifier & Schottky Diode Schottky 3-Pin SOT-23 BAS70E6327HTSA1

N° de stock RS:: 249-6995
Référence fabricant:: BAS70E6327HTSA1
Fabricant:: Infineon

Infineon 70 V 70 mA Rectifier & Schottky Diode Schottky 3-Pin SOT-23 BAS70E6327HTSA1

Sous-total (1 paquet de 10 unités)*

2,24 €

(TVA exclue)

2,71 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

1 460 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité	le paquet*
10 +	0,224 €	2,24 €

*Prix donné à titre indicatif

N° de stock RS:: 249-6995
Référence fabricant:: BAS70E6327HTSA1
Fabricant:: Infineon

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Infineon
	Mount Type	Surface
	Product Type	Rectifier & Schottky Diode
	Package Type	SOT-23
	Maximum Continuous Forward Current If	70mA
	Peak Reverse Repetitive Voltage Vrrm	70V
	Series	BAS70
	Diode Configuration	Single
	Rectifier Type	Schottky
	Pin Count	3
	Peak Reverse Current Ir	100nA
	Minimum Operating Temperature	-55°C
	Peak Non-Repetitive Forward Surge Current Ifsm	100mA
	Maximum Forward Voltage Vf	1V
	Maximum Operating Temperature	125°C
	Width	1mm
	Standards/Approvals	RoHS
	Length	2.9mm
	Height	2.4mm
	Automotive Standard	AEC-Q101

	Sélectionner tout
	Marque Infineon
	Mount Type Surface
	Product Type Rectifier & Schottky Diode
	Package Type SOT-23
	Maximum Continuous Forward Current If 70mA
	Peak Reverse Repetitive Voltage Vrrm 70V
	Series BAS70
	Diode Configuration Single
	Rectifier Type Schottky
	Pin Count 3
	Peak Reverse Current Ir 100nA
	Minimum Operating Temperature -55°C
	Peak Non-Repetitive Forward Surge Current Ifsm 100mA
	Maximum Forward Voltage Vf 1V
	Maximum Operating Temperature 125°C
	Width 1mm
	Standards/Approvals RoHS
	Length 2.9mm
	Height 2.4mm
	Automotive Standard AEC-Q101

Datasheet - BAS70E6327HTSA1

Infineon BAS70 Series Rectifier & Schottky Diode, 70V Peak Reverse Repetitive Voltage, 70mA Maximum Continuous Forward Current - BAS70E6327HTSA1

This rectifier and Schottky diode is a surface-mount component designed for low-voltage signal and switching applications. It operates across a wide temperature range and is suitable where fast switching and low forward drop are required. The device is offered in a Compact SOT-23 package and conforms to industry environmental restrictions.

Features and Benefits:

• 1000mV maximum forward voltage delivering reduced conduction losses
• 70mA continuous forward current enabling steady micro-signal operation
• 100mA Peak non‑repetitive surge current protecting against brief transients
• 0.1μA Peak reverse current ensuring minimal leakage in reverse bias
• -55 to 125°C operating range supporting high-temperature environments

Applications

• Suitable for signal rectification in portable electronics
• Ideal for reverse-polarity protection on supply lines
• Used with switching regulators for fast recovery paths
• Can be used for level-clamping in mixed-signal circuits
• Suitable for automotive electronics complying with AEC‑Q101 standards

What package type should I expect for PCB assembly?

The component is supplied in a SOT-23 surface-mount package suited to automated pick-and-place processes.

How does it behave under brief surge conditions?

It tolerates Peak non‑repetitive forward surges up to 100mA for short durations without damage.

What thermal limits govern safe operation?

The device functions across an ambient range from -55°C up to 125°C.

Is the device compliant with environmental directive requirements?

It meets RoHS restrictions for the absence of specified hazardous substances.

How large is the reverse blocking capability?

It supports a Peak reverse repetitive voltage of 70V for reverse‑bias applications.