onsemi 10 V 1 A Diode Switching 5-Pin POWERMITE MBRM110ET1G
- N° de stock RS:
- 186-7713
- Référence fabricant:
- MBRM110ET1G
- Fabricant:
- onsemi
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 186-7713
- Référence fabricant:
- MBRM110ET1G
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Mount Type | Surface | |
| Product Type | Diode | |
| Package Type | POWERMITE | |
| Maximum Continuous Forward Current If | 1A | |
| Peak Reverse Repetitive Voltage Vrrm | 10V | |
| Diode Configuration | Single | |
| Rectifier Type | Switching | |
| Pin Count | 5 | |
| Peak Reverse Current Ir | 500μA | |
| Maximum Forward Voltage Vf | 0.59V | |
| Minimum Operating Temperature | -55°C | |
| Peak Non-Repetitive Forward Surge Current Ifsm | 50A | |
| Maximum Operating Temperature | 150°C | |
| Standards/Approvals | No | |
| Length | 2.18mm | |
| Height | 1.05mm | |
| Width | 2.05mm | |
| Automotive Standard | AEC-Q101 | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Mount Type Surface | ||
Product Type Diode | ||
Package Type POWERMITE | ||
Maximum Continuous Forward Current If 1A | ||
Peak Reverse Repetitive Voltage Vrrm 10V | ||
Diode Configuration Single | ||
Rectifier Type Switching | ||
Pin Count 5 | ||
Peak Reverse Current Ir 500μA | ||
Maximum Forward Voltage Vf 0.59V | ||
Minimum Operating Temperature -55°C | ||
Peak Non-Repetitive Forward Surge Current Ifsm 50A | ||
Maximum Operating Temperature 150°C | ||
Standards/Approvals No | ||
Length 2.18mm | ||
Height 1.05mm | ||
Width 2.05mm | ||
Automotive Standard AEC-Q101 | ||
Low IR Extends Battery Life
Low Profile - Maximum Height of 1.1 mm
Small Footprint - Footprint Area of 8.45 mm2
150°C Operating Junction Temperature
Low Thermal Resistance with Direct Thermal Path of Die on Exposed Cathode Heat Sink
Mechanical Characteristics:
Case: Molded Epoxy
Weight: 62 mg (approximately)
Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Maximum for 10 Seconds
Pb-Free Packages are Available
PPAP capable
NRVB Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements
Liens connexes
- onsemi 10 V 1 A Diode Switching 5-Pin POWERMITE
- onsemi 30 V 1 A Diode Schottky 2-Pin POWERMITE MBRM130LT1G
- onsemi 20 V 1 A Diode Schottky 2-Pin POWERMITE MBRM120ET1G
- onsemi 20 V 1 A Diode Schottky 2-Pin POWERMITE MBRM120ET3G
- onsemi 40 V 2 A Diode Schottky 2-Pin POWERMITE MBRM140T3G
- onsemi 40 V 1 A Diode Schottky 2-Pin POWERMITE MBRM140T1G
- onsemi 20 V 1 A Diode Schottky 2-Pin POWERMITE MBRM120LT1G
- onsemi 100 V 10 A Diode Switching 5-Pin DFN